CHOW BRIGHT VENTURES HOLDINGS PUBLIC COMPANY LIMITEDSET: CHOW🇹🇭 TH

Business Operation · 2025

Corporate Information

Company Name

CHOW BRIGHT VENTURES HOLDINGS PUBLIC COMPANY LIMITED

Telephone

0-2033-0901-08

Website

https://www.chowbright.com

Email

info@chowbright.com

Dividend Policy

Dividend Policy

CHOW BRIGHT VENTURES HOLDINGS PUBLIC COMPANY LIMITED
The Company's dividend payment policy is to pay dividends at a rate of not less than 40 percent of net profit after corporate income tax of the separate financial statements and after deducting legal reserves, and other reserves as determined by the Company. However, such dividend payment may be subject to change depending on the Company's financial position, operating results, investment plans, other necessities and appropriateness in the future as deemed appropriate by the Board of Directors and/or the shareholders of the Company.

Retrospective Dividend Payment Information for the Years 2011 – 2025. The Company paid dividends to shareholders as follows:

Accounting periods

Dividend per Share (Baht)

Payment Date

1 January – 31 December 2011

0.10

on 3 May 2012

1 January – 30 September 2013

0.10

on 4 December 2013


Historical Dividend Payments

This YearLast Year2 Years Ago3 Years Ago4 Years AgoMetricDescription
0.070.180.511.28-0.33Net profit per share (Baht : Share)Net profit per share (baht : share)
00000Dividend per share (Baht : Share)Dividend per share (baht : share)
00000Dividend stock ratio (Number of original shares: dividend shares)Ratio of stock dividend payment (existing share : stock dividend)
00000Dividend share value per share (Baht : Share)Value of stock dividend per share (baht : share)
00000Total dividend payment value (Baht : Share)Total dividend payment (baht : share)
00000Dividend payout ratio to net profit (%)Dividend payout ratio compared to net profit (%)

Major Shareholders

Introduction

The list of the company’s major shareholders is as follows (as of 30 December 2025).

Major Shareholders

No.NameShares% SharesParent No.
14,305MR.ANAVIN JIRATOMSIRI GROUP517,039,10064.63
14,306MRS.SHARUTA CHIN (Former Name: MISS SHARUTA JIRATOMSIRI)40,500,0005.06
14,307MR.CHAIRAT KOVITCHINDACHAI35,624,9004.45
14,308MR.JITIPORN JANTARACH21,500,0002.68
14,309MR.SANTI KOVITCHINDACHAI16,600,0002.07
14,311MR.SANGUANKIAT LEWMANOMONT10,600,0001.32
14,312MS.SIRIWAN TANGCHAROENCHAICHANA9,500,0001.18
14,313MR.WASAN FONGSAMUTRAT8,817,0001.18
14,314MR. UKRIT TANTHASATIAN9,000,0001.12
14,316MR.TANARAT RUKARIYAPONG7,799,0000.97
14,317MR.ANAVIN JIRATOMSIRI304,700,00038.0814,305
14,319CITIBANK NOMINEES SINGAPORE PTE LTD-ART A/C UNITED OVERSEAS BANK NOMINEES (PRIVATE) LIMITED (holding shares on behalf of MR.ANAVIN JIRATOMSIRI)130,000,00016.2514,305
14,320MS.MAN WAI KOO40,500,0005.0614,305
31,328MISS KANYAKORN PONGPANISH7,730,0000.96
31,329MR.KRITTHANA JONGTHANASETTHAKUL5,137,8000.64
31,330MR.SINCHOK PIRIYOTHAISAKUN4,902,6000.61
31,332MR.TANAT BURAPATANA4,195,0000.52
31,334MR.YIK MAN STANLEY JIRATOMSIRI 16,939,1002.1114,305
31,335MRS.BENCHAMAT CHIRATHAMSIRI24,900,0003.114,305

Business Strategies Overview

Vision

In 2025, Chow Bright Ventures Holdings Public Company Limited reviewed its vision and mission to ensure alignment with the company’s business operations and the current economic environment.

Vision
To be a central hub for managing a diverse portfolio of investments and businesses, with agility to connect new opportunities, driving strong and sustainable growth through strategic investments and partnerships.

Mission

  1. Invest in high-potential businesses and manage the portfolio flexibly to generate appropriate returns.

  2. Foster connectivity and enhance capabilities among affiliated companies to increase the overall value of the group.

  3. Drive the organization with agility, adapting to changes and seizing new opportunities rapidly.

  4. Build and expand collaborations with partners to grow the business and access new opportunities.

  5. Achieve sustainable growth under good corporate governance, creating long-term value for all stakeholders.

Objectives

the Group is committed to developing high-quality steel products that meet international standards while promoting the use of clean energy from solar power to minimize environmental impact and support sustainable growth.

Goals

Steel Business

1. Generate revenue from Toll Manufacturing Agreement to maintain a steady cash flow for the company.

2. Generate revenue from the steel trading business, covering the entire supply chain from raw materials (scrap metal) to standardized finished products, with a focus on expanding markets both domestically and internationally to increase sales and profitability for the group.

3. Focus on efficient asset management to enhance opportunities for long-term sustainable growth.

4. Continuously develop the company's personnel to enhance their knowledge, expertise, and specialized skills.

5. Implement pollution control measures in the production process to reduce operational costs while driving the organization and society toward Net Zero.


Renewable Energy Business

The Group's solar power business has experienced significant growth, driven by the private sector's increasing focus on environmental sustainability and concrete support from the government. Additionally, rising electricity costs in the country have accelerated the shift among private enterprises toward reducing energy expenses. As a result, many businesses are opting to install solar rooftop power systems, which provide clean energy solutions.


The Group continues to emphasize its business strategy of investing in renewable energy power generation projects both domestically and internationally. These investments cover large-scale (Utility scale) projects, commercial and industrial (C&I scale) projects, and small-scale (Residential Rooftop) projects. Furthermore, the Group expands its product and service offerings through modern trade channels, leveraging business acquisitions and the development of new projects both locally and abroad.

Business Strategies

The Group focuses on investing in high-growth businesses that deliver stable and recurring returns over the long term, while actively building a diversified and resilient portfolio. We prioritize investments that create strong synergies with our existing businesses, enhancing operational efficiency, strengthening competitive advantage, and maximizing overall portfolio value. Growth will be pursued through a balanced approach of both organic expansion and selective inorganic investments. As a holding company, we place strong emphasis on disciplined capital allocation, ensuring that each investment contributes to sustainable growth, cash flow stability, and long-term shareholder value. In addition, we actively cultivate strategic partnerships with leading partners across industries. These collaborations are built on a foundation of transparency, strong governance, and shared standards, enabling long-term cooperation and mutual growth. Through this approach, the Group aims to strengthen its position as a dynamic investment platform capable of capturing new opportunities while delivering consistent and sustainable returns.

Material Changes & Developments

Material Changes & Developments

YearDescription
2,023
  • In 2023, CHOW fully redeemed its long-term debentures, CHOW212A and CHOW213A, upon their maturity on May 7, 2023, and May 20, 2023, respectively.
    • CEPL established three subsidiaries in Thailand to support future power plant investments:

  • Shining Sky Holdings Co., Ltd. (SSH), with initial capital of 1,000,000 Baht, in which CEPL holds 100% of the total equity. On March 13, 2023, SSH's Extraordinary General Meeting of Shareholders approved an increase in registered capital by 491 million Baht (4.91 million ordinary shares at a par value of 100 Baht per share), which SSH registered with the Ministry of Commerce on April 26, 2023. Additionally, on April 24, 2023, CEPL transferred its investments in: CSN: 415 million Baht (4.15 million ordinary shares at 100 Baht per share) Shining SPV 1 Co., Ltd. (SSPV1): 76 million Baht (10,000 ordinary shares at 100 Baht per share and 3 million ordinary shares at 25 Baht per share) These transfers were made to SSH as part of the group’s investment restructuring. Shining Solution Co., Ltd. (SS) and Shining SPV 2 Co., Ltd. (SSPV2), each with initial capital of 1,000,000 Baht, fully owned by CEPL.

  • On May 19, 2023, the Extraordinary General Meeting of Shareholders of Chow & Hakko approved an increase in registered capital by 13 million Baht. Chow Energy Public Company Limited, a subsidiary of the company and a joint venture partner of Chow & Hakko, paid 50% of the called-up capital, amounting to 3.25 million Baht. Chow & Hakko registered this capital increase with the Ministry of Commerce on June 1, 2023.

  • On July 14, 2023, CSN acquired 2 million Baht worth of ordinary shares in S.R.O.A. Co., Ltd. from an unrelated company, increasing CSN's shareholding from 90% to 100%. CEPL entered into a long-term strategic business partnership with BlackRock’s Climate Finance Partnership (CFP), a subsidiary of BlackRock, Inc. (not a related party of the company). CFP is a Climate Change Infrastructure Fund focused on renewable energy projects. The partnership aims to develop solar power plants and renewable energy projects in Thailand under long-term Power Purchase Agreements (PPA). As part of this partnership, CFP acquired 2,409,573 shares in Shining Sky Holding Co., Ltd. (SSH), representing 49% of SSH’s total issued shares on August 30, 2023.

2,024

Chow Energy Public Company Limited Group

  • On 23 February 2024, a meeting the Board of Directors of Chow Energy Public Company Limited (“CE”) passed a resolution to approve a Baht 1,155 million decrease in its registered share capital of Chow International Company Limited (“CI”) from Baht 1,540 million (15,400,000 ordinary shares with a par value of Baht 100 each) to Baht 385 million (3,850,000 ordinary shares with a par value of Baht 100 each), through the decrease of 11,550,000 ordinary shares with a par value of Baht 100 each. CI registered the decrease in its share capital with the Ministry of Commerce on 22 April 2024. The decrease in share capital did not have any impact on the Group’s interest.

  • On 9 August 2023, CE entered into Shining Solution Company Limited (“SSCL”) ’s share sale and purchase agreement with an unrelated foreign company (the buyer) and transferred 49 percent interest in SSCL's ordinary shares to the purchaser on 2 May 2024, pursuant to a resolution passed by CE's Extraordinary General Meeting of Shareholders as of 24 August 2023, resulting in a reduction of CE’s shareholding in SSCL from 100 percent to 51 percent. The change in ownership structure enabled CE and the buyer to jointly control SS, as specified in the conditions under the shareholder agreement. The Group has, therefore, reclassified its investment in SSCL from investment in a subsidiary to investment in a joint venture from 2 May 2024.

  • On 15 May 2024, CE transferred its ordinary shares invested in Shining SPV 2 Company Limited (“SSPV 2”) with a net asset value of Baht 0.1 million to a joint venture at a price of Baht 1 million in order to restructure the Group’s investment. As a result, the Group reclassified its investment in SSPV2 from investment in a subsidiary to investment in a joint venture from that date onwards.

  • On 7 December 2023, the Extraordinary General Meeting of SSH’s shareholders passed a resolution approving an increase of Baht 440 million in its registered share capital. The Company, a joint venture of SSH, had already made a payment for 100 percent of called-up shares in proportion to its shareholding in January 2024, totaling Baht 224 million. SSH registered the increase in share capital with the Ministry of Commerce on 5 January 2024.


    Chow Steel Manufacturing Company Limited

  • On 15 May 2024, the Board of Directors Meeting of the Company passed a resolution approving the incorporation of Chow Steel Manufacturing Company Limited (“CSM”), a subsidiary in Thailand, with a registered share capital of Baht 1 million (representing 10,000 ordinary shares with a par value of Baht 100 per share). Subsequently, on 13 August 2024, the Board of Directors Meeting of the Company passed a resolution approving the partial transfer of the steel manufacturing and distribution business from the Company to CSM, with a transaction value of no less than Baht 1,200 million, to restructure the Group’s investments under common control (with the Company’s shareholding of 100% in CSM). Upon completion of the business restructuring, the Company is to transition to a holding company, while CSM is to continues to operate the steel manufacturing and distribution business. CSM was incorporated and registered with the Ministry of Commerce on 20 August 2024. The Company initiated the process of transferring the business in the fourth quarter of the current year, with competition expected within one year from the reporting date.

2,022
  • on March 2022, Steel Factory located in Kabinburi Industrial Estate, Prachinburi Province. It had maximum production capacity of 480,000 tons per year in Phase 2. The Company ready to comeback for re-operating and started to receive the production orders.
    • on March 2022, Dispose of subsidiaries registered in Japan of total enterprise value of the assets at approximately JPY33,000.0 millions or equivalent to THB9,699million completed.

  • on 13 May 2022, the meeting of the Board of Directors has resolved to approve the Reorganization of the Company, Appointment of Chief Executive Officer (CEO), and Appointment of Chief Financial Officer (CFO).

  • on 13 May 2022, the meeting of the meeting of the Board of Directors has resolved to approve investing in Cryptocurrency Mining. The total investment not more than of THB150 million.

  • On 17 May 2022, CHOW and CKE Renewable Co., Ltd. (Joint Venture) (“CHOW and CKE”) the winner of auction of CPF Solar Cell Phase 3 project. The Company will be responsible for all operations including investment of solar power generation systems i.e. Solar Farm, Solar Floating and Solar Rooftop at the Project owner’s site in 60 areas to sell the generated electricity at discount price from the average electricity rate of the Electricity Authority for a period of 15 years.

  • CEPL established one subsidiary in Thailand to support future power plant investments: Shining SPV 1 Co., Ltd. (SSPV1) with initial capital of 1,000,000 Baht, in which CEPL holds 100% of the total equity. Subsequently, on October 7, 2022, the Extraordinary General Meeting of Shareholders No. 2/2022 of SSPV1 approved an increase in registered capital by an additional 299,000,000 Baht through the issuance of 2,990,000 new ordinary shares at a par value of 100 Baht per share. A 25% call on the newly issued shares was made, amounting to 74,750,000 Baht. SSPV1 registered this capital increase with the Ministry of Commerce on November 9, 2022.

2,025

On 25 April 2025, the Company’s Annual General Meeting of Shareholders approved the change of the Company's name from “Chow Steel Industries Public Company Limited” to “Chow Bright Ventures Holdings Public Company Limited”. The name change was registered with the Ministry of Commerce on 6 May 2025.

2,025

On 22 September 2025, the Extraordinary General Meeting of Shareholders of the Company passed a resolution approving the business restructuring via a partial business transfer. The Company initiated the process of transferring the business in the fourth quarter of the year 2024 and completed the asset transfer in the year 2025.

2,025

Chow Steel Manufacturing Company Limited (“CSM”)

On 14 July 2025, the Extraordinary General Meeting of CSM’s shareholders passed a resolution approving an increase of Baht 1,299 million in its registered share capital from Baht 1 million (10,000 ordinary shares with a par value of Baht 100 each) to Baht 1,300 million (13,000,000 ordinary shares with a par value of Baht 100 each). CSM registered the increase in its share capital with Ministry of Commerce in two tranches in accordance with the approved resolution, i.e. Baht 799 million (7,990,000 ordinary shares with a par value of Baht 100 each) on 22 July 2025 and Baht 500 million (5,000,000 ordinary shares with par value of Baht 100 each) on 7 August 2025, respectively. The increase in share capital did not have any impact on the Company’s interest.

2,025

Shining Sky Holdings Company Limited (“SSH”)

  • On 25 April 2025, the Annual General Meeting of SSH’s shareholders passed a resolution approving an increase of Baht 182 million in its registered share capital. Chow Energy, a joint venturer of SSH, already received a transfer of newly issued ordinary shares and made full payment for the shares in proportion to its existing shareholding, totaling Baht 93 million, in June 2025. SSH registered its share capital increase with the Ministry of Commerce on 9 July 2025.

  • on 27 October 2025, the Extraordinary General Meeting of SSH’s shareholders passed a resolution approving an increase of Baht 340 million in its registered share capital. Chow Energy, a joint venturer of SSH, already received a transfer of newly issued ordinary shares and made full payment for the shares in proportion to its existing shareholding, totaling Baht 173 million, in November 2025. SSH registered its share capital increase with the Ministry of Commerce on 28 November 2025.

2,025

On 3 September 2025, CSM successfully received the transfer of the industrial product license of the Company. Subsequently, on 8 September 2025, the Thai Industrial Standards Institute (TISI) issued a letter authorizing CSM to use the abbreviation “CSI” in place of the full name when displaying the standard mark on the Company’s industrial products, effective from the date of the authorization until the license expires.

2,026

On 23 February 2026, a meeting the Board of Directors of Chow Energy passed a resolution to approve interim dividend of Baht 0.605 per share totaling Baht 690 million.

2,026

On 23 February 2026, at the Board of Directors’ Meeting of Chow Energy pass resolution to approve of the following matters:

  • The Board approved the reduction of the Chow Energy’s registered capital from Baht 815 million to Baht 570 million by cancelling 490 million unissued ordinary shares with a par value of Baht 0.50 per share.

  • The Board approved the change of the par value of the Chow Energy’s ordinary shares from Baht 0.50 per share to Baht 1 per share by way of a reverse stock split at a ratio of 2 existing shares to 1 new share. As a result of the reverse stock split, the total number of the CE’s shares will be reduced by 570 million shares, from 1,140 million shares to 570 million shares, with a par value of Baht 1 per share.

  • The Board approved the increase of the Chow Energy’s registered capital by Baht 245 million, from Baht 570 million to Baht 815 million, by issuing 245 million new ordinary shares with a par value of Baht 1 per share (after the par value change via reverse stock split).

The above resolutions will be proposed to the Chow Energy’s shareholders’ Meeting for further consideration and approval.

2,026

The Company has registered the establishment of two new subsidiaries, CBVH Trading Co., Ltd. and ReSteel Solution Co., Ltd., to support its steel business.

Use of Proceeds from Securities Offerings

Is There Money Raised from a Securities Offering Still to Report On?

No

Commitments Made in the Registration Statement

Are There Commitments or Conditions from an Offering or Listing?

No

Group Operating-Structure Policy

Description

The group’s operational segregation policy assigns each company within the group its own Board of Directors, responsible for overseeing and managing the company. The Board operates independently in supervising the company’s activities within the scope of its designated authority and responsibilities.

Companies Where the Company Holds ≥10%

Companies (≥10% Holding)

Company NameAddressProvinceZip CodeTelephoneFaxBusiness TypeSecurity TypeSharesPaid-up Shares
VERTEX LOGISTIC SERVICES COMPANY LIMITED2525 FYI Center, Tower 2, 10th Floor, Unit 2/1007-1008, Rama 4 Road, Khlongtoei Sub-district, Khlongtoei District, Bangkok101100 2033 0917-180 2033 0909Logistics service (Dormant) Common shares18,00018,000
CHOW ENERGY PUBLIC COMPANY LIMITED2525 FYI Center Tower 2, 10th Floor, Unit 2/1007-1008, Rama 4 Road, Khlongtoei, Khlongtoei Bangkok Bangkok10110020330910-11020330909Investment in and consulting on investment in renewable power generation and distribution businessCommon shares1,140,000,0001,140,000,000
CAPTAIN CASH HOLDING COMPANY LIMITED2525 FYI Center Tower 2, 10th Floor, Unit 2/1007-1008, Rama 4 Road, Khlongtoei, Khlongtoei Bangkok Bangkok101100 2033 0921-220 20990909Investment in Personal loan and Nano finance under supervisionCommon shares5,000,0005,000,000
SHINING SKY HOLDINGS COMPANY LIMITED2525 FYI Center Tower 2, 10th Floor, Unit 2/1007-1008, Rama 4 Road, Khlongtoei, Khlongtoei Bangkok Bangkok101100 2033 0924Investment in the renewable power generation and distribution businessCommon shares14,536,59414,536,594
CAPTAIN CASH CAPITAL COMPANY LIMITED2525 FYI Center Tower 2, 10th Floor, Unit 2/1007-1008, Rama 4 Road, Khlongtoei, Khlongtoei Bangkok Bangkok101100 2033 0912-14Personal loan and Nano finance under supervisionCommon shares5,000,0005,000,000
CHOW INTERNATIONAL COMPANY LIMITED2525 FYI Center Tower 2, 10th Floor, Unit 2/1007-1008, Rama 4 Road, Khlongtoei, Khlongtoei Bangkok Bangkok101100 2033 0915-16Investment in and consulting on investment in renewable power generation and distribution business and the Group's business centerCommon shares15,400,00015,400,000
PREMIER SOLUTION COMPANY LIMITED2525 FYI Center Tower 2, 10th Floor, Unit 2/1007-1008, Rama 4 Road, Khlongtoei, Khlongtoei Bangkok101100 2033 0919-20Consulting on investment in renewable power generation and distribution business and provision of services for design, installation and maintenance of power generation systems Common shares2,000,0002,000,000
SHINING SOLUTION COMPANY LIMITED2525 FYI Center Tower 2, 10th Floor, Unit 2/1007-1008, Rama 4 Road, Khlongtoei, Khlongtoei Bangkok Bangkok101100 2033 0924Consulting on investment in renewable power generation and distribution business and provision of service for design, installation and maintenance of power generation systems Common shares10,00010,000
CHOW STEEL MANUFACTURING COMPANY LIMITED2525 FYI Center Tower 2, 10th Floor, Unit 2/1007-1008, Rama 4 Road, Khlongtoei, Khlongtoei Bangkok Bangkok101100 2033 0901Tolling service, manufacture and distribution of steel billetsCommon shares13,000,00013,000,000
CHOW SHINING ENERGY COMPANY LIMITED2525 FYI Center Tower 2, 10th Floor, Unit 2/1007-1008, Rama 4 Road, Khlongtoei, Khlongtoei Bangkok101100 2033 0924Investment in the renewable power generation and distribution businessCommon shares5,550,0005,550,000
SHINING SPV 1 COMPANY LIMITED2525 FYI Center Tower 2, 10th Floor, Unit 2/1007-1008, Rama 4 Road, Khlongtoei, Khlongtoei BangkokBangkok101100 2033 0924Investment in the renewable power generation and distribution businessCommon shares3,000,0003,000,000
SHINING SPV 2 COMPANY LIMITED2525 FYI Center Tower 2, 10th Floor, Unit 2/1007-1008, Rama 4 Road, Khlongtoei, Khlongtoei Bangkok101100 2033 0924Investment in the renewable power generation and distribution businessCommon shares10,00010,000
SHINING SPV 3 COMPANY LIMITED2525 FYI Center Tower 2, 10th Floor, Unit 2/1007-1008, Rama 4 Road, Khlongtoei, Khlongtoei Bangkok101100 2033 0924Investment in the renewable power generation and distribution businessCommon shares10,00010,000
THAI SOLAR ROOFTOP CP COMPANY LIMITED2525 FYI Center Tower 2, 10th Floor, Unit 2/1007-1008, Rama 4 Road, Khlongtoei, Khlongtoei Bangkok101100 2033 0923Investment in the renewable power generation and distribution businessCommon shares10,00010,000
S.R.G.A. COMPANY LIMITED2525 FYI Center Tower 2, 10th Floor, Unit 2/1007-1008, Rama 4 Road, Khlongtoei, Khlongtoei Bangkok101100 2033 0925Investment in the renewable power generation and distribution businessCommon shares1,700,0001,700,000
S.R.O.A. COMPANY LIMITED2525 FYI Center Tower 2, 10th Floor, Unit 2/1007-1008, Rama 4 Road, Khlongtoei, KhlongtoeiBangkok101100 2033 0926Investment in the renewable power generation and distribution businessCommon shares200,000200,000
PREMIER SOLUTION JAPAN KABUSHIKI KAISHA141-0022, #502, 1-19-4, Higashi Gotanda, Shinagawa ward, Tokyo JapanN/AConstruction and management of power plantsCommon shares00
AE SOLAR GODO KAISHA141-0022, #502, 1-19-4, Higashi Gotanda, Shinagawa ward, Tokyo JapanN/APower generation and distributionCommon shares00
SUN SOLAR GODO KAISHA141-0022, #502, 1-19-4, Higashi Gotanda, Shinagawa ward, Tokyo JapanN/APower generation and distribution Common shares00
SUN PARTNER JAPAN GODO KAISHA141-0022, #502, 1-19-4, Higashi Gotanda, Shinagawa ward, Tokyo JapanN/APower generation and distribution Common shares00
PREMIER SOLUTION AUSTRALIA PTY. LTD.Tower One – International Towers Sydney Level 46 100 Barangaroo Avenue Barangaroo NSW 2000NAInvestment in the renewable power generation and distribution business Common shares550,100550,100
PREMIER SOLUTION HOLDCO PTY. LTD.Tower One – International Towers Sydney Level 46 100 Barangaroo Avenue Barangaroo NSW 2000NAInvestment in the renewable power generation and distribution business Common shares1010
PREMIER SOLUTION OPCO PTY. LTD.Tower One – International Towers Sydney Level 46 100 Barangaroo Avenue Barangaroo NSW 2000 NASolar power generation and distribution Common shares1010
PREMIER SOLUTION AUSTRALIA 2 PTY. LTD.Tower One – International Towers Sydney Level 46 100 Barangaroo Avenue Barangaroo NSW 2000NAInvestment in the renewable power generation and distribution business Common shares1010
CHOW INTERNATIONAL TRADING CHINA COMPANY LIMITEDRoom 501, 5/F., Sun Hung Kai Centre, 30 Harbour Road, Wanchai, Hong Kong NADistribution of equipment in relation to power generation systems and steelCommon shares100100
RICI INTERNATIONAL INVESTMENT PTE. LTD.38 BEACH ROAD, #23-11, SOUTH BEACH TOWER, SINGAPORE 189767N/AInvestment in the renewable power generation and distribution businessCommon shares15,850,10015,850,100
CHOW AND HACO SOLAR COMPANY LIMITED2525 FYI Center Tower 2, 10th Floor, Unit 2/1007-1008, Rama 4 Road, Khlongtoei, Khlongtoei Bangkok1011002 033 0928Investment in and consulting on in renewable power generation and distribution business Common shares200,000200,000
CHOW AND CKE RENEWABLE COMPANY LIMITED2525 FYI Center Tower 2, 10th Floor, Unit 2/1007-1008, Rama 4 Road, Khlongtoei, Khlongtoei Bangkok1011002 033 0928Investment in and consulting on investment in renewable power generation and distribution business Common shares200,000200,000
VERTEX LOGISTIC SERVICES COMPANY LIMITED2525 FYI Center, Tower 2, 10th Floor, Unit 2/1007-1008, Rama 4 Road, Khlongtoei Sub-district, Khlongtoei District, Bangkok101100 2033 0917-180 2033 0909Logistics service (Dormant) Common shares18,00018,000
CHOW ENERGY PUBLIC COMPANY LIMITED2525 FYI Center Tower 2, 10th Floor, Unit 2/1007-1008, Rama 4 Road, Khlongtoei, Khlongtoei Bangkok Bangkok10110020330910-11020330909Investment in and consulting on investment in renewable power generation and distribution businessCommon shares1,140,000,0001,140,000,000
CAPTAIN CASH HOLDING COMPANY LIMITED2525 FYI Center Tower 2, 10th Floor, Unit 2/1007-1008, Rama 4 Road, Khlongtoei, Khlongtoei Bangkok Bangkok101100 2033 0921-220 20990909Investment in Personal loan and Nano finance under supervisionCommon shares5,000,0005,000,000
SHINING SKY HOLDINGS COMPANY LIMITED2525 FYI Center Tower 2, 10th Floor, Unit 2/1007-1008, Rama 4 Road, Khlongtoei, Khlongtoei Bangkok Bangkok101100 2033 0924Investment in the renewable power generation and distribution businessCommon shares14,536,59414,536,594
CAPTAIN CASH CAPITAL COMPANY LIMITED2525 FYI Center Tower 2, 10th Floor, Unit 2/1007-1008, Rama 4 Road, Khlongtoei, Khlongtoei Bangkok Bangkok101100 2033 0912-14Personal loan and Nano finance under supervisionCommon shares5,000,0005,000,000
CHOW INTERNATIONAL COMPANY LIMITED2525 FYI Center Tower 2, 10th Floor, Unit 2/1007-1008, Rama 4 Road, Khlongtoei, Khlongtoei Bangkok Bangkok101100 2033 0915-16Investment in and consulting on investment in renewable power generation and distribution business and the Group's business centerCommon shares15,400,00015,400,000
PREMIER SOLUTION COMPANY LIMITED2525 FYI Center Tower 2, 10th Floor, Unit 2/1007-1008, Rama 4 Road, Khlongtoei, Khlongtoei Bangkok101100 2033 0919-20Consulting on investment in renewable power generation and distribution business and provision of services for design, installation and maintenance of power generation systems Common shares2,000,0002,000,000
SHINING SOLUTION COMPANY LIMITED2525 FYI Center Tower 2, 10th Floor, Unit 2/1007-1008, Rama 4 Road, Khlongtoei, Khlongtoei Bangkok Bangkok101100 2033 0924Consulting on investment in renewable power generation and distribution business and provision of service for design, installation and maintenance of power generation systems Common shares10,00010,000
CHOW STEEL MANUFACTURING COMPANY LIMITED2525 FYI Center Tower 2, 10th Floor, Unit 2/1007-1008, Rama 4 Road, Khlongtoei, Khlongtoei Bangkok Bangkok101100 2033 0901Tolling service, manufacture and distribution of steel billetsCommon shares13,000,00013,000,000
CHOW SHINING ENERGY COMPANY LIMITED2525 FYI Center Tower 2, 10th Floor, Unit 2/1007-1008, Rama 4 Road, Khlongtoei, Khlongtoei Bangkok101100 2033 0924Investment in the renewable power generation and distribution businessCommon shares5,550,0005,550,000
SHINING SPV 1 COMPANY LIMITED2525 FYI Center Tower 2, 10th Floor, Unit 2/1007-1008, Rama 4 Road, Khlongtoei, Khlongtoei BangkokBangkok101100 2033 0924Investment in the renewable power generation and distribution businessCommon shares3,000,0003,000,000
SHINING SPV 2 COMPANY LIMITED2525 FYI Center Tower 2, 10th Floor, Unit 2/1007-1008, Rama 4 Road, Khlongtoei, Khlongtoei Bangkok101100 2033 0924Investment in the renewable power generation and distribution businessCommon shares10,00010,000
SHINING SPV 3 COMPANY LIMITED2525 FYI Center Tower 2, 10th Floor, Unit 2/1007-1008, Rama 4 Road, Khlongtoei, Khlongtoei Bangkok101100 2033 0924Investment in the renewable power generation and distribution businessCommon shares10,00010,000
THAI SOLAR ROOFTOP CP COMPANY LIMITED2525 FYI Center Tower 2, 10th Floor, Unit 2/1007-1008, Rama 4 Road, Khlongtoei, Khlongtoei Bangkok101100 2033 0923Investment in the renewable power generation and distribution businessCommon shares10,00010,000
S.R.G.A. COMPANY LIMITED2525 FYI Center Tower 2, 10th Floor, Unit 2/1007-1008, Rama 4 Road, Khlongtoei, Khlongtoei Bangkok101100 2033 0925Investment in the renewable power generation and distribution businessCommon shares1,700,0001,700,000
S.R.O.A. COMPANY LIMITED2525 FYI Center Tower 2, 10th Floor, Unit 2/1007-1008, Rama 4 Road, Khlongtoei, KhlongtoeiBangkok101100 2033 0926Investment in the renewable power generation and distribution businessCommon shares200,000200,000
PREMIER SOLUTION JAPAN KABUSHIKI KAISHA141-0022, #502, 1-19-4, Higashi Gotanda, Shinagawa ward, Tokyo JapanN/AConstruction and management of power plantsCommon shares00
AE SOLAR GODO KAISHA141-0022, #502, 1-19-4, Higashi Gotanda, Shinagawa ward, Tokyo JapanN/APower generation and distributionCommon shares00
SUN SOLAR GODO KAISHA141-0022, #502, 1-19-4, Higashi Gotanda, Shinagawa ward, Tokyo JapanN/APower generation and distribution Common shares00
SUN PARTNER JAPAN GODO KAISHA141-0022, #502, 1-19-4, Higashi Gotanda, Shinagawa ward, Tokyo JapanN/APower generation and distribution Common shares00
PREMIER SOLUTION AUSTRALIA PTY. LTD.Tower One – International Towers Sydney Level 46 100 Barangaroo Avenue Barangaroo NSW 2000NAInvestment in the renewable power generation and distribution business Common shares550,100550,100
PREMIER SOLUTION HOLDCO PTY. LTD.Tower One – International Towers Sydney Level 46 100 Barangaroo Avenue Barangaroo NSW 2000NAInvestment in the renewable power generation and distribution business Common shares1010
PREMIER SOLUTION OPCO PTY. LTD.Tower One – International Towers Sydney Level 46 100 Barangaroo Avenue Barangaroo NSW 2000 NASolar power generation and distribution Common shares1010
PREMIER SOLUTION AUSTRALIA 2 PTY. LTD.Tower One – International Towers Sydney Level 46 100 Barangaroo Avenue Barangaroo NSW 2000NAInvestment in the renewable power generation and distribution business Common shares1010
CHOW INTERNATIONAL TRADING CHINA COMPANY LIMITEDRoom 501, 5/F., Sun Hung Kai Centre, 30 Harbour Road, Wanchai, Hong Kong NADistribution of equipment in relation to power generation systems and steelCommon shares100100
RICI INTERNATIONAL INVESTMENT PTE. LTD.38 BEACH ROAD, #23-11, SOUTH BEACH TOWER, SINGAPORE 189767N/AInvestment in the renewable power generation and distribution businessCommon shares15,850,10015,850,100
CHOW AND HACO SOLAR COMPANY LIMITED2525 FYI Center Tower 2, 10th Floor, Unit 2/1007-1008, Rama 4 Road, Khlongtoei, Khlongtoei Bangkok1011002 033 0928Investment in and consulting on in renewable power generation and distribution business Common shares200,000200,000
CHOW AND CKE RENEWABLE COMPANY LIMITED2525 FYI Center Tower 2, 10th Floor, Unit 2/1007-1008, Rama 4 Road, Khlongtoei, Khlongtoei Bangkok1011002 033 0928Investment in and consulting on investment in renewable power generation and distribution business Common shares200,000200,000
CHOW STEEL MANUFACTURING COMPANY LIMITED2525 FYI Center Tower 2, 10th Floor, Unit 2/1007-1008, Rama 4 Road, Khlongtoei, KhlongtoeiBangkok1011002033090101-8020330909Long Steel Products Manufacturing Business Common shares13,000,00013,000,000
SHINING SOUTHERN COMPANY LIMITED120/10, Moo 3, Na Thawi Sub-District, Na Thawi DistrictSongkhla90160N/AN/A Investment in the renewable power generation and distribution businessCommon shares15,300,00015,300,000
EQUATOR SOLAR ONE COMPANY LIMITED2525 FYI Center Tower 2, 10th Floor, Unit 2/1007-1008, Rama 4 Road, Khlongtoei, Khlongtoei Bangkok101100 2033 0924N/A Investment in the renewable power generation and distribution businessCommon shares1,648,2001,648,200
SHINING SPV 4 COMPANY LIMITED2525 FYI Center Tower 2, 10th Floor, Unit 2/1007-1008, Rama 4 Road, Khlongtoei, Khlongtoei Bangkok101100 2033 0924N/A Investment in the renewable power generation and distribution businessCommon shares10,00010,000
CBVH TRADING COMPANY LIMITEDNo.2525 FYI Center Tower 2, 10th Floor, Unit 2/1007-1008, Rama 4 Road, Khlongtoei, Khlongtoei Bangkok10110020330910-11N/A the trading business for steel productsCommon shares10,00010,000
RESTEEL SOLUTION COMPANY LIMITED2525 FYI Center Tower 2, 10th Floor, Unit 2/1007-1008, Rama 4 Road, Khlongtoei, Khlongtoei Bangkok10110020330901-8-The company is engaged in the business of processing, crushing, compressing, sorting, and recycling all types of scrap metal and metal residues, including the processing, distribution, sale, purchase, import, and export of related products.Common shares10,00010,000
SHINING SPV 4 COMPANY LIMITED2525 FYI Center Tower 2, 10th Floor, Unit 2/1007-1008, Rama 4 Road, Khlongtoei, Khlongtoei Bangkok10110020330910-11N/A Investment in the renewable power generation and distribution businessCommon shares10,00010,000
SHINING SPV 5 COMPANY LIMITED 2525 FYI Center Tower 2, 10th Floor, Unit 2/1007-1008, Rama 4 Road, Khlongtoei, Khlongtoei Bangkok10110020330910-11N/A Investment in the renewable power generation and distribution businessCommon shares10,00010,000
SHINING SPV 6 COMPANY LIMITED2525 FYI Center Tower 2, 10th Floor, Unit 2/1007-1008, Rama 4 Road, Khlongtoei, Khlongtoei Bangkok10110020330910-11N/A Investment in the renewable power generation and distribution businessCommon shares50,00050,000
SHINING SPV 7 COMPANY LIMITED 2525 FYI Center Tower 2, 10th Floor, Unit 2/1007-1008, Rama 4 Road, Khlongtoei, Khlongtoei Bangkok10110020330910-11N/A Investment in the renewable power generation and distribution businessCommon shares50,00050,000
SHINING SPV 8 COMPANY LIMITED 2525 FYI Center Tower 2, 10th Floor, Unit 2/1007-1008, Rama 4 Road, Khlongtoei, Khlongtoei Bangkok10110020330910-11N/A Investment in the renewable power generation and distribution businessCommon shares1,500,0001,500,000
SHINING SPV 9 COMPANY LIMITED2525 FYI Center Tower 2, 10th Floor, Unit 2/1007-1008, Rama 4 Road, Khlongtoei, Khlongtoei Bangkok10110020330910-11N/A Investment in the renewable power generation and distribution businessCommon shares50,00050,000
SHINING SPV 10 COMPANY LIMITED120/10, Moo 3, Nathawi Subdistrict, Nathawi DistrictSongkhla90160N/A N/A Investment in the renewable power generation and distribution businessCommon shares50,00050,000
TU 6 COMPANY LIMITED 2525 FYI Center Tower 2, 10th Floor, Unit 2/1007-1008, Rama 4 Road, Khlongtoei, Khlongtoei Bangkok10110020330910-11N/A Investment in the renewable power generation and distribution businessCommon shares10,000,00010,000,000
GREEN RENEWABLE SOLUTION COMPANY LIMITED2525 FYI Center Tower 2, 10th Floor, Unit 2/1007-1008, Rama 4 Road, Khlongtoei, Khlongtoei Bangkok10110020330910-11N/A Investment in the renewable power generation and distribution businessCommon shares1,500,0001,500,000
SKY FUTURE POWER COMPANY LIMITED120/10, Moo 3, Nathawi Subdistrict, Nathawi DistrictSongkhla90160N/AN/A Investment in the renewable power generation and distribution businessCommon shares1,500,0001,500,000

Shareholders with Potential Conflict of Interest

Has Potential-Conflict Shareholder (Y/N)

No

Relationships Among Major Shareholders

Relationship Exists (Y/N)

No

Shareholders' Agreement

Agreement Exists (Y/N)

No

Shareholding Diagram (Group Structure)

Does the company hold shares in other companies?

Yes

Subsidiaries

Company NameJuristic Persons / Holders
VERTEX LOGISTIC SERVICES COMPANY LIMITEDCHOW BRIGHT VENTURES HOLDINGS PUBLIC COMPANY LIMITED · Voting rights percent: 40.0 · Shareholding proportion percent: 40.0
CHOW ENERGY PUBLIC COMPANY LIMITEDCHOW BRIGHT VENTURES HOLDINGS PUBLIC COMPANY LIMITED · Voting rights percent: 87.36 · Shareholding proportion percent: 87.36
CAPTAIN CASH HOLDING COMPANY LIMITEDCHOW BRIGHT VENTURES HOLDINGS PUBLIC COMPANY LIMITED · Voting rights percent: 76.0 · Shareholding proportion percent: 76.0
CAPTAIN CASH CAPITAL COMPANY LIMITEDCHOW BRIGHT VENTURES HOLDINGS PUBLIC COMPANY LIMITED · Voting rights percent: 0.0 · Shareholding proportion percent: 0.0 · CAPTAIN CASH HOLDING COMPANY LIMITED · Voting rights percent: 100.0 · Shareholding proportion percent: 100.0
CHOW INTERNATIONAL COMPANY LIMITEDCHOW BRIGHT VENTURES HOLDINGS PUBLIC COMPANY LIMITED · Voting rights percent: 0.0 · Shareholding proportion percent: 0.0 · CHOW ENERGY PUBLIC COMPANY LIMITED · Voting rights percent: 100.0 · Shareholding proportion percent: 100.0
PREMIER SOLUTION COMPANY LIMITEDCHOW BRIGHT VENTURES HOLDINGS PUBLIC COMPANY LIMITED · Voting rights percent: 0.0 · Shareholding proportion percent: 0.0 · CHOW ENERGY PUBLIC COMPANY LIMITED · Voting rights percent: 100.0 · Shareholding proportion percent: 100.0
CHOW STEEL MANUFACTURING COMPANY LIMITEDCHOW BRIGHT VENTURES HOLDINGS PUBLIC COMPANY LIMITED · Voting rights percent: 100.0 · Shareholding proportion percent: 100.0
PREMIER SOLUTION JAPAN KABUSHIKI KAISHACHOW BRIGHT VENTURES HOLDINGS PUBLIC COMPANY LIMITED · Voting rights percent: 0.0 · Shareholding proportion percent: 0.0 · PREMIER SOLUTION COMPANY LIMITED · Voting rights percent: 100.0 · Shareholding proportion percent: 100.0
AE SOLAR GODO KAISHACHOW BRIGHT VENTURES HOLDINGS PUBLIC COMPANY LIMITED · Voting rights percent: 0.0 · Shareholding proportion percent: 0.0 · PREMIER SOLUTION JAPAN KABUSHIKI KAISHA · Voting rights percent: 100.0 · Shareholding proportion percent: 100.0
SUN SOLAR GODO KAISHACHOW BRIGHT VENTURES HOLDINGS PUBLIC COMPANY LIMITED · Voting rights percent: 0.0 · Shareholding proportion percent: 0.0 · PREMIER SOLUTION JAPAN KABUSHIKI KAISHA · Voting rights percent: 100.0 · Shareholding proportion percent: 100.0
SUN PARTNER JAPAN GODO KAISHACHOW BRIGHT VENTURES HOLDINGS PUBLIC COMPANY LIMITED · Voting rights percent: 0.0 · Shareholding proportion percent: 0.0 · PREMIER SOLUTION JAPAN KABUSHIKI KAISHA · Voting rights percent: 100.0 · Shareholding proportion percent: 100.0
PREMIER SOLUTION AUSTRALIA PTY. LTD.CHOW BRIGHT VENTURES HOLDINGS PUBLIC COMPANY LIMITED · Voting rights percent: 0.0 · Shareholding proportion percent: 0.0 · PREMIER SOLUTION COMPANY LIMITED · Voting rights percent: 100.0 · Shareholding proportion percent: 100.0
PREMIER SOLUTION HOLDCO PTY. LTD.CHOW BRIGHT VENTURES HOLDINGS PUBLIC COMPANY LIMITED · Voting rights percent: 0.0 · Shareholding proportion percent: 0.0 · PREMIER SOLUTION AUSTRALIA PTY. LTD. · Voting rights percent: 100.0 · Shareholding proportion percent: 100.0
PREMIER SOLUTION OPCO PTY. LTD.CHOW BRIGHT VENTURES HOLDINGS PUBLIC COMPANY LIMITED · Voting rights percent: 0.0 · Shareholding proportion percent: 0.0 · PREMIER SOLUTION HOLDCO PTY. LTD. · Voting rights percent: 100.0 · Shareholding proportion percent: 100.0
PREMIER SOLUTION AUSTRALIA 2 PTY. LTD.CHOW BRIGHT VENTURES HOLDINGS PUBLIC COMPANY LIMITED · Voting rights percent: 0.0 · Shareholding proportion percent: 0.0 · RICI INTERNATIONAL INVESTMENT PTE. LTD. · Voting rights percent: 100.0 · Shareholding proportion percent: 100.0
CHOW INTERNATIONAL TRADING CHINA COMPANY LIMITEDCHOW BRIGHT VENTURES HOLDINGS PUBLIC COMPANY LIMITED · Voting rights percent: 0.0 · Shareholding proportion percent: 0.0 · CHOW INTERNATIONAL COMPANY LMITED · Voting rights percent: 100.0 · Shareholding proportion percent: 100.0
RICI INTERNATIONAL INVESTMENT PTE. LTD.CHOW BRIGHT VENTURES HOLDINGS PUBLIC COMPANY LIMITED · Voting rights percent: 0.0 · Shareholding proportion percent: 0.0 · CHOW INTERNATIONAL COMPANY LMITED · Voting rights percent: 100.0 · Shareholding proportion percent: 100.0
CHOW STEEL MANUFACTURING COMPANY LIMITEDCHOW BRIGHT VENTURES HOLDINGS PUBLIC COMPANY LIMITED · Voting rights percent: 100.0 · Shareholding proportion percent: 100.0
CBVH TRADING COMPANY LIMITEDCHOW BRIGHT VENTURES HOLDINGS PUBLIC COMPANY LIMITED · Voting rights percent: 100.0 · Shareholding proportion percent: 100.0
RESTEEL SOLUTION COMPANY LIMITEDCHOW BRIGHT VENTURES HOLDINGS PUBLIC COMPANY LIMITED · Voting rights percent: 0.0 · Shareholding proportion percent: 0.0 · CHOW STEEL MANUFACTURING COMPANY LIMITED · Voting rights percent: 100.0 · Shareholding proportion percent: 100.0

Joint-Venture Companies

Company NameJuristic Persons / Holders
SHINING SKY HOLDINGS COMPANY LIMITEDCHOW BRIGHT VENTURES HOLDINGS PUBLIC COMPANY LIMITED · Voting rights percent: 0.0 · Shareholding proportion percent: 0.0 · CHOW ENERGY PUBLIC COMPANY LIMITED · Voting rights percent: 51.0 · Shareholding proportion percent: 51.0 · CFP APAC Holdings VCC · Voting rights percent: 49.0 · Shareholding proportion percent: 49.0
SHINING SOLUTION COMPANY LIMITEDCHOW BRIGHT VENTURES HOLDINGS PUBLIC COMPANY LIMITED · Voting rights percent: 0.0 · Shareholding proportion percent: 0.0 · CHOW ENERGY PUBLIC COMPANY LIMITED · Voting rights percent: 51.0 · Shareholding proportion percent: 51.0 · CFP APAC Holdings VCC · Voting rights percent: 49.0 · Shareholding proportion percent: 49.0
CHOW SHINING ENERGY COMPANY LIMITEDCHOW BRIGHT VENTURES HOLDINGS PUBLIC COMPANY LIMITED · Voting rights percent: 0.0 · Shareholding proportion percent: 0.0 · SHINING SKY HOLDINGS COMPANY LIMITED · Voting rights percent: 100.0 · Shareholding proportion percent: 100.0
SHINING SPV 1 COMPANY LIMITEDCHOW BRIGHT VENTURES HOLDINGS PUBLIC COMPANY LIMITED · Voting rights percent: 0.0 · Shareholding proportion percent: 0.0 · SHINING SKY HOLDINGS COMPANY LIMITED · Voting rights percent: 100.0 · Shareholding proportion percent: 100.0
SHINING SPV 2 COMPANY LIMITEDCHOW BRIGHT VENTURES HOLDINGS PUBLIC COMPANY LIMITED · Voting rights percent: 0.0 · Shareholding proportion percent: 0.0 · SHINING SKY HOLDINGS COMPANY LIMITED · Voting rights percent: 100.0 · Shareholding proportion percent: 100.0
SHINING SPV 3 COMPANY LIMITEDCHOW BRIGHT VENTURES HOLDINGS PUBLIC COMPANY LIMITED · Voting rights percent: 0.0 · Shareholding proportion percent: 0.0 · SHINING SKY HOLDINGS COMPANY LIMITED · Voting rights percent: 100.0 · Shareholding proportion percent: 100.0
THAI SOLAR ROOFTOP CP COMPANY LIMITEDCHOW BRIGHT VENTURES HOLDINGS PUBLIC COMPANY LIMITED · Voting rights percent: 0.0 · Shareholding proportion percent: 0.0 · CHOW SHINING ENERGY COMPANY LIMITED · Voting rights percent: 100.0 · Shareholding proportion percent: 100.0
S.R.G.A. COMPANY LIMITEDCHOW BRIGHT VENTURES HOLDINGS PUBLIC COMPANY LIMITED · Voting rights percent: 0.0 · Shareholding proportion percent: 0.0 · CHOW SHINING ENERGY COMPANY LIMITED · Voting rights percent: 100.0 · Shareholding proportion percent: 100.0
S.R.O.A. COMPANY LIMITEDCHOW BRIGHT VENTURES HOLDINGS PUBLIC COMPANY LIMITED · Voting rights percent: 0.0 · Shareholding proportion percent: 0.0 · CHOW SHINING ENERGY COMPANY LIMITED · Voting rights percent: 100.0 · Shareholding proportion percent: 100.0
CHOW AND HACO SOLAR COMPANY LIMITEDCHOW BRIGHT VENTURES HOLDINGS PUBLIC COMPANY LIMITED · Voting rights percent: 0.0 · Shareholding proportion percent: 0.0 · CHOW ENERGY PUBLIC COMPANY LIMITED · Voting rights percent: 50.0 · Shareholding proportion percent: 50.0 · HACO ELECTRIC (THAILAND) COMPANY LIMITED · Voting rights percent: 50.0 · Shareholding proportion percent: 50.0
CHOW AND CKE RENEWABLE COMPANY LIMITEDCHOW BRIGHT VENTURES HOLDINGS PUBLIC COMPANY LIMITED · Voting rights percent: 0.0 · Shareholding proportion percent: 0.0 · CHOW ENERGY PUBLIC COMPANY LIMITED · Voting rights percent: 50.0 · Shareholding proportion percent: 50.0 · CHAROEN KRUNG ENGINEERING COMPANY LIMITED · Voting rights percent: 45.0 · Shareholding proportion percent: 45.0
SHINING SOUTHERN COMPANY LIMITEDCHOW BRIGHT VENTURES HOLDINGS PUBLIC COMPANY LIMITED · Shareholding proportion percent: 0.0 · SHINING SKY HOLDINGS COMPANY LIMITED · Shareholding proportion percent: 51.0 · V K N SOLAR COMPANY LIMITED · Shareholding proportion percent: 49.0
EQUATOR SOLAR ONE COMPANY LIMITEDCHOW BRIGHT VENTURES HOLDINGS PUBLIC COMPANY LIMITED · Shareholding proportion percent: 0.0 · SHINING SKY HOLDINGS COMPANY LIMITED · Shareholding proportion percent: 100.0
SHINING SPV 4 COMPANY LIMITEDCHOW BRIGHT VENTURES HOLDINGS PUBLIC COMPANY LIMITED · Shareholding proportion percent: 0.0 · SHINING SKY HOLDINGS COMPANY LIMITED · Shareholding proportion percent: 100.0
GREEN RENEWABLE SOLUTION COMPANY LIMITEDCHOW BRIGHT VENTURES HOLDINGS PUBLIC COMPANY LIMITED · Shareholding proportion percent: 0.0 · SHINING SPV 4 COMPANY LIMITED · Shareholding proportion percent: 100.0
SHINING SPV 5 COMPANY LIMITEDCHOW BRIGHT VENTURES HOLDINGS PUBLIC COMPANY LIMITED · Shareholding proportion percent: 0.0 · SHINING SKY HOLDINGS COMPANY LIMITED · Shareholding proportion percent: 100.0
SKY FUTURE POWER COMPANY LIMITEDCHOW BRIGHT VENTURES HOLDINGS PUBLIC COMPANY LIMITED · Shareholding proportion percent: 0.0 · SHINING SPV 5 COMPANY LIMITED · Shareholding proportion percent: 100.0
SHINING SPV 6 COMPANY LIMITEDCHOW BRIGHT VENTURES HOLDINGS PUBLIC COMPANY LIMITED · Shareholding proportion percent: 0.0 · SHINING SKY HOLDINGS COMPANY LIMITED · Shareholding proportion percent: 100.0
SHINING SPV 7 COMPANY LIMITEDCHOW BRIGHT VENTURES HOLDINGS PUBLIC COMPANY LIMITED · Shareholding proportion percent: 0.0 · SHINING SKY HOLDINGS COMPANY LIMITED · Shareholding proportion percent: 100.0
SHINING SPV 8 COMPANY LIMITEDCHOW BRIGHT VENTURES HOLDINGS PUBLIC COMPANY LIMITED · Shareholding proportion percent: 0.0 · SHINING SPV 7 COMPANY LIMITED · Shareholding proportion percent: 100.0
SHINING SPV 9 COMPANY LIMITEDCHOW BRIGHT VENTURES HOLDINGS PUBLIC COMPANY LIMITED · Shareholding proportion percent: 0.0 · SHINING SKY HOLDINGS COMPANY LIMITED · Shareholding proportion percent: 100.0
SHINING SPV 10 COMPANY LIMITEDCHOW BRIGHT VENTURES HOLDINGS PUBLIC COMPANY LIMITED · Shareholding proportion percent: 0.0 · SHINING SPV 9 COMPANY LIMITED · Shareholding proportion percent: 100.0
TU 6 COMPANY LIMITEDCHOW BRIGHT VENTURES HOLDINGS PUBLIC COMPANY LIMITED · Shareholding proportion percent: 0.0 · SHINING SKY HOLDINGS COMPANY LIMITED · Shareholding proportion percent: 100.0

Income Structure

Product / Service Income

CategoryDescriptionThis YearThis Year %Last YearLast Year %2 Years Ago2 Years Ago %
Total revenue from operationsTotal revenue from operations1,225,6621003,528,3611003,795,814100
Steel business1,038,38784.723,149,20089.252,778,57173.2
Energy business187,27515.28379,16110.751,017,24326.8
OtherOthers000000

Export Income

CategoryDescriptionThis YearThis Year %Last YearLast Year %2 Years Ago2 Years Ago %
Total revenueTotal revenue1,225,6621003,528,3611003,795,814100
DomesticDomestic1,205,39498.353,507,59499.413,795,814100
InternationalInternational20,267.41.6520,7670.5900
JapanJapan20,267.410020,76710000
Other countriesOthers000000

Other Income

Operating Other IncomeNon-Operating Other IncomeShare of Profit
1710 · As of year: 75370.29 · Description: Total other income · As of yesteryear: 151740.8 · As of year before yesteryear: 101074.26 · 1711 · As of year: 0.0 · Description: Other income from operations · As of yesteryear: 95085.0 · As of year before yesteryear: 0.01712 · As of year: 75370.29 · Description: Other income not from operations · As of yesteryear: 56655.8 · As of year before yesteryear: 101074.261713 · As of year: 9696.13 · Description: Share of profit · As of yesteryear: 1540.82 · As of year before yesteryear: -1479.91

Product / Service Characteristics

Business Type

3114

Business Groups

Business GroupDescription
Steel

Steel Business

The Company is a producer and distributor of steel billet of several grades up to the customers’ needs by adjusting chemical composition, such as carbon, silicon, and manganese, etc. during the melting process. The Company produces several dimensions and lengths of products by using different sizes of casting crucible and has the billet cut into different lengths by automatic cutting machine to serve the needs of both small and large rolling mills. Product specifications and production details are marked on the products for easy tracking. The Company’s billet will be distributed to rolling mills for further production of long products which are divided according to properties and application purposes into two types, as below:


1) Billet for production of round bar

Billet for production of round bar, i.e. SR 24, with the sizes of 120x120 mm. and 150x150 mm., and the length of 6-12 meters. This type of billet has high strength and elasticity. Normally, round bar is used in construction industry for medium and small buildings such as house, commercial building, and general construction, etc.

The Company has a policy to manufacture steel billet which will be fabricated into round bars having the consistent chemical composition with the round bar specifications as specified in the Thai Industrial Standard (“TIS.”)

20-2559 to help steel manufacturers producing the product with specification that meet the required standard.


2) Billet for production of deformed bar

Billet for production of deformed bar, i.e. SD 30 and SD 40, with the sizes of 120x120 mm. and 150x150 mm., and the length of 6–12 meters. This type of billet has high strength due to high carbon content, but has less elasticity. Deformed bar has ridges along the surface, which makes it adhere better. Normally deformed bar is used in large construction and reinforced concrete works such as bridge, dam, expressway, and construction works that can tolerate high compression, or high building, etc. At present, steel with high carbon is widely used owing to its high strength against applied load and thus helps cut costs with less use of steel.

TISI. has not stipulated a standard for steel billets allocated for deformed bar manufacturing. However, the Company has the policy to create such product with the chemical specifications consistent with the chemical specification of the deformed bar according to TIS. 24-2559 standard to ensure the manufacturers of steel bard will have chemical specifications that meet required standard.

For exporting, the Company’s products meet international standard. For example, the 3SP billet properties and application is similar to SR 24 billet while 5SP billet properties and application is similar to SD30 billet, and SD295A billet, which is normally rolled into large deformed bar with high tensile. In 2009, the Company has become a member of London Metal Exchange (LME) which is the forwards exchange with the world's largest market in standardized forward contracts under the trade name CHOW KABINBURI with the source code classified by warehouse locations: CHOWFE for Far East Contract and CHOWME for Mediterranean Contract. With the membership in such a reliable institute, our customers will be confident that our products are of the world standard.


3) Billets for the Production of Low Carbon Steel Wire Rods

Billets used for further processing into low carbon steel wire rods include 3SP billets, which come in cross-sectional sizes of 120x120 mm and 150x150 mm, with lengths ranging from 6 to 12 meters. These billets offer high flexibility. Typically, low carbon steel wire rods are used for binding wires, nails, and wire mesh. The company has a policy to produce billets specifically for the manufacturing of low carbon steel wire rods by ensuring that the chemical composition complies with the Thai Industrial Standard (TIS) 348-2559. This ensures that manufacturers can produce end products that meet the required industry standards.

Description of Product

Product and Service

(1.1) Steel Billet Business

The Company is a producer and distributor of steel billet of several grades up to the customers’ needs by adjusting chemical composition, such as carbon, silicon, and manganese, etc. during the melting process. The Company produces several dimensions and lengths of products by using different sizes of casting crucible and has the billet cut into different lengths by automatic cutting machine to serve the needs of both small and large rolling mills. Product specifications and production details are marked on the products for easy tracking. The Company’s billet will be distributed to rolling mills for further production of long products which are divided according to properties and application purposes into two types, as below:

1.2) Billet for production of round bar

Billet for production of round bar, i.e. SR 24, with the sizes of 100x100 mm., 120x120 mm. and 150x150 mm., and the length of 6-12 meters. This type of billet has high strength and elasticity. Normally, round bar is used in construction industry for medium and small buildings such as house, commercial building, and general construction, etc.

The Company has a policy to manufacture steel billet which will be fabricated into round bars having the consistent chemical composition with the round bar specifications as specified in the Thai Industrial Standard (“TIS.”) 20-2543 to help steel manufacturers producing the product with specification that meet the required standard. The chemical specifications of the round bar, based on the product properties, are within the TIS. Standard range, despite the Thai Industrial Standard Institute (“TISI”) does not stipulate any standards of steel billet manufactured into the round bar. The specification is shown below:

A table showing chemical composition based on a product

Quality level

Chemical composition

Max. carbon

Max. phosphorus

Max. sulfur

SR 24

0.28%

0.058%

0.058%

1.3) Billet for production of deformed bar

Billet for production of deformed bar, i.e. SD 30 and SD 40, with the sizes of 100x100 mm., 120x120 mm. and 150x150 mm., and the length of 6–12 meters. This type of billet has high strength due to high carbon content, but has less elasticity. Deformed bar has ridges along the surface, which makes it adhere better. Normally deformed bar is used in large construction and reinforced concrete works such as bridge, dam, expressway, and construction works that can tolerate high compression, or high building, etc. At present, steel with high carbon is widely used owing to its high strength against applied load and thus helps cut costs with less use of steel.

TISI. has not stipulated a standard for steel billets allocated for deformed bar manufacturing. However, the Company has the policy to create such product with the chemical specifications consistent with the chemical specification of the deformed bar according to TIS. 242548 standard to ensure the manufacturers of steel bard will have chemical specifications that meet required standard. According to the crucible size and deviation criteria of chemical specification of the product, the deformed bar chemical composition is within TIS. standard range. The specification is shown below:

A table showing chemical composition based on crucible size

Quality level

Chemical composition

Max. carbon

Max. manganese

Max. phosphorus

Max. sulfur

Max. carbon (Manganese/6)

SD 30

0.27%

-

0.05%

0.05%

0.50%

SD 40

-

1.80%

0.05%

0.05%

0.55%

Source: Thai Industrial Standards Institute (TISI.)

A table showing a standard deviation of chemical composition based on a product

Component

Tolerance

Carbon

+ 0.03%

Manganese

+ 0.05%

Phosphorus

+ 0.01%

Sulfur

+ 0.01%

Source: Thai Industrial Standards Institute (TISI.)

For exporting, the Company’s products meet international standard. For example, the 3SP billet properties and application is similar to SR 24 billet while 5SP billet properties and application is similar to SD30 billet, and SD295A billet, which is normally rolled into large deformed bar with high tensile. In 2009, the Company has become a member of London Metal Exchange (LME) which is the forwards exchange with the world's largest market in standarised forward contracts under the trade name CHOW KABINBURI with the source code classified by warehouse locations: CHOWFE for Far East Contract and CHOWME for Mediterranean Contract. With the membership in such a reliable institute, our customers will be confident that our products are of the world standard.

Each type of our steel billets comprises the following chemical composition:

A table showing billet chemical composition produced by the Company:

Grade

%

Carbon

%

Silicon

%

Manganese

%

Phosphorus

%

Sulfur

%

Cr

%

Aluminum

%

CU

%

CEPL

SR24/3SP

<0.28

0.15-0.22

0.40-0.65

<0.050

<0.050

<0.50

<0.02

<0.30

0.33 MAX

SD30/5SP

<0.30

0.15-0.30

0.45-0.80

<0.050

<0.050

<0.50

<0.02

<0.30

0.40 MAX

SD40/SD295A

0.25-0.30

0.25-0.40

0.70-0.90

<0.050

<0.050

<0.50

<0.02

<0.30

0.45 MAX

Source: CHOW Bright Ventures PCL.

Made in Thailand (MiT)” Product Certification

The Company has been awarded the “Made in Thailand (MiT)” Product Certification by the Federation of Thai Industries for its steel products, which include:

  • Steel Billets and Bars: Models 3SP, 5SP, SD30, SD40, SR24

  • Carbon Steel Wire Rods: Models SWRM12, SWRM15, SWRM17, SWRM20, SWRM22

  • Reinforcing Steel for Concrete: Deformed bars SD40, Round bars SR24

For more information on the certification, please visit: https://www.chowbright.com/en/about-us/certification

Renewable Energy

Generation and Distribution of Solar Power Business

Generation and distribution of solar power is the major business of Group Companies as it can create cash flow stably and sustainably throughout the power plant project period. Group Companies has a policy to invest and develop solar power plant projects in the country and overseas. Currently, Group Companies plants are in Japan, Thailand, and Australia.


Group companies power plant projects can be summarized as follows.

1. Solar Farm Projects in Japan

Currently, the Group has the Saito project, with an installed capacity of 2.2 megawatts, located in Saito City, Miyagi Prefecture, Japan, which is operating commercially to sell electricity.

Saito Project, Japan

2. Solar Rooftop Projects and Solar Farm in Thailand

The group of subsidiaries have secured 965 power purchase agreements for solar rooftop projects in Thailand with a combined installed capacity of 6.62 MW, or 3-10 kW per agreement. Electricity so generated will be distributed to Provincial Electricity Generating Authority (“PEA”) and Metropolitan Electricity Generating Authority (“MEA”) under non-firm power purchase agreements and at the fixed tariff rate of 6.85 baht per kWh throughout a 25-year contractual term from the COD. This is compliant with Thailand’s rules and regulations on solar rooftop program for residential units, under which power distribution is scheduled by 31 December 2015. The solar rooftop projects in Thailand have all been invested through Chow International Co., Ltd. (“CI”), the wholly owned subsidiary.

In 2020, CEPL establish Chow and CKE Renewable Co., Ltd., a joint venture between CEPL and Charoen Krung Engineering Co., Ltd, in order to engage in the business of operating renewable energy systems and In 2021, CEPL, through its indirect subsidiaries, has established Chow and Haco Solar Co., Ltd., a joint venture with Haco Electric (Thailand) Co., Ltd., in order to engage in the business of construction services for renewable energy projects in Thailand. The group of subsidiaries have operated in Finished and Under-Construction Solar Rooftop Projects in solar power purchase agreements between public company (Private PPA) and an EPC Contractor.

In 2023, the Group formed a strategic partnership with BlackRock to reinforce its capital structure, supporting sustainable long-term growth in the renewable energy sector and improving access to low-cost financing.

Solar Farm 2, Phetchaburi Province

Solar Rooftop Project (YSS)

Solar Rooftop Project (CP All)

Solar Rooftop (A1 Hotel)

Floating Solar Power Plant (Animal Feed Factory, Sisaket Province)

3. Solar Projects in Australia

In 2019, the group of subsidiaries disclosed its intention to invest in three solar power plant projects with total installed capacity of 172.80 MW, namely Project AU1 with an installed capacity of 30 MW located in South Australia, Project AU2 with an installed capacity of 71.40 MW and Project AU3 with an installed capacity of 71.40 MW located in Victoria, Australia. The electricity generated will be dispatched into the Commonwealth of Australia’s National Electricity Market.

Currently, the projects in Australia under development.


The renewable energy business group has continued to demonstrate steady growth through both organic and inorganic expansion. In September 2025, the Group successfully completed the acquisition of a 100% equity interest in an unrelated company in Thailand operating a solar power plant (solar farm) project with a total installed capacity of 10 megawatts. The project has already achieved Commercial Operation Date (COD), enabling the Group to immediately recognize revenue and operating results from the investment. In addition, the Group has progressively entered into an increasing number of Power Purchase Agreements (PPAs). As of the present date, the Group’s portfolio comprises power generation projects that are already selling electricity, projects that have completed construction and are in the process of obtaining grid connection approvals, projects under development and construction, as well as projects currently under negotiation for PPAs in both Thailand and overseas. The total combined capacity of such projects amounts to not less than 450 megawatts. (Reference projects the Group of Companies: https://www.chowenergy.co.th/en/reference-projects

Research & Development

Has R&D Policy (Y/N)

No

R&D Cost — Description

N/A

R&D Cost — Label

Research and development (R&D) expenses over the past 3 years (Million Baht)

R&D Cost — This Year

0.0

R&D Cost — Last Year

0.0

R&D Cost — 2 Years Ago

0.0

Assets Used in the Business

Permanent Assets — Description

Fixed Assets Used in Business Operations As of December 31, 2025, the Group's total fixed assets used in business operations amounted to THB 1,248.06 million, as follows:

Asset

Book Value

(THB million)

Ownership

Encumbrance

  1. Land

160.17

Owned

Pledged as collateral

  1. Buildings and Systems

373.94

Owned

Pledged as collateral

  1. Machinery and Equipment

557.69

Owned

None

  1. Power Plants, Components, and Rooftop Solar Equipment

117.20

Owned

None

  1. Furniture and Office Equipment

2.26

Owned

None

  1. Vehicles

13.34

Owned

None

  1. Assets Under Installation and Construction

23.46

Owned

None

Total

1,248.06

Note: The Group has pledged land and buildings as collateral for credit facilities obtained from financial institutions.

Investment in subsidiaries

As of December 31, 2025, the Company’s investments in subsidiaries amounting to 1,778.58 million baht, representing 78.53% of total assets according to the Company's separate financial statements. The details are as follows.

Subsidiaries

Shareholding proportion (%)

Book value

(million baht)

Percentage of Total assets

of the Company (%)

Investment in CEPL

87.36

440.08

19.43

Investment in CSM

100.00

1,300.00

57.40

Investment in CCH

76.00

38.00

1.68

Investment in VTL

76.00

0.49

0.02

Total investment

1,778.58

75.53

Investment in joint ventures

As of December 31, 2025, the Company’s investments in joint venture amounting to 828.35 million baht, representing 27.49% of total assets according to the Company's consolidated financial statements. The details are as follows.

Joint Venture

Shareholding proportion (%)

Book value

(million baht)

Percentage of Total assets of the Company (%)

Investment in CHOW and HACO

50.00

7.47

0.25

Investment in CHOW and CKE

50.00

9.90

0.33

Investment in SSH

51.00

810.98

26.91

Total investment

828.35

27.49

Investment Property

As of 31 December 2025, the Company has investment property of 16.31 million baht represents land and land held for rent for solar power projects in Japan.

Intangible Assets — Description

Intangible Assets As of December 31, 2025, the Group's total intangible assets amounted to THB 11.72 million, comprising computer software and power purchase agreement (PPA) rights.

Has Subsidiaries Investment Policy (Y/N)

Yes

Subsidiaries Investment Policy — Description

Chow Bright Ventures Holdings Public Company Limited

The Company has a policy to diversify into the renewable energy business in addition to its core business of production and distribution of steel in a bid to mitigate risk associated with the steel business. The Company will invest in a proportion that is sufficient to participate in the management and determination of direction of such business. If in the future it is necessary to make additional investment in the subsidiary, associated and related companies, the Company will invest in the business that supports and benefits its own business operation, taking into account the return and other benefits expected from such investment, in order to support and promote the businesses of its group of companies. The investment proportion will be considered as appropriate and based on the expected return on investment primarily in the interests of the Company’s shareholders. The Company will supervise these companies by way of nominating its directors and/or designated persons as its representatives on a pro rata basis to participate in the management of such businesses and have the right to vote at the board of directors’ meeting and the shareholders’ meeting for the utmost benefit of the Company.


Chow Energy Public Company Limited Group

Chow Energy Public Company Limited Group has a policy to invest in subsidiary and associated companies and other companies engaging in production and distribution of electricity from renewable energy to synergize the Group’s related business growth potential with existing business operation prospects, as follows:

  1. The Company has planned to invest in projects expected to give returns no less than weighted average investment cost (WACC).

  2. The Company has duly entered into power sale and purchase agreements with reliable contract parties.

  3. The Company has invested in projects where related equipment and parts can be procured at reasonable cost and dependable quality, as well as with availability of maintenance within an appropriate period.

  4. The Company has invested in socially beneficial and environmentally friendly projects.

  5. The Company has developed projects on its own in case of projects of the size matching its potential.

  6. In case of joint ventures with other investors, the Company has planned to make joint investment in projects with good potential and joint investors in which have business operation policy in line with that of the Company.


In this regard, the Company has a policy in place to control and determine business policy and framework with representatives appointed to be directors in the subsidiary and associated companies on a pro-rata basis and as agreed upon among the shareholders (if any). Directors so appointed shall perform directorship duties and exercise the right to vote at the shareholders’ meeting of such companies in line with or as resolved by the meetings of the Board of Directors or the shareholders. And executives have the authority according to the authority manual: practices guideline.

Marketing Policy & Competition

Reporting Mode

3117

Marketing Policy (Overall)

Steel Businesses

Market and target group of billet business

Marketing strategy For over the past years of running business, the Company has built trust and satisfaction for customers in terms of product and service quality that is fast, punctual, honest. Followings are our competition strategy to gain continual trust from customers.


1) Products & Services
The Company's main policy is to manufacture and distribute the product that meet customers' demand, with priority on the product quality. Our manufacturing involves modern machinery and effective production procedures, which include production plan, maintenance and quality check in every step to maintain the consistency of product quality standard.

The Company has a policy to produce steel billet with the chemical composition consistent with the round bar composition in accordance with TIS. 20-2543 standard and the deformed bar in accordance with the TIS. 24-2548 standard to help steel bar manufacturers in producing the product having a quality that meet the required standard despite the Thai Industrial Standard Institute (TISI.) has not stipulated the standard for billet. Furthermore, to manifest that our product meets the world class standard, the Company has registered the name CHOW KABINBURI with the London Metal Exchange - the world class forwarded trading market. Such progress will enable the Company to enlarge sales channels to oversea market and highlight the brand recognition in the global scale.
In 2024, the company received certification for three products: RB6, RB8, and RB9. This certification enhances the value of the products, the organization, and its stakeholders, as well as aligns with the growing consumer interest in environmental concerns that influence purchasing decisions. The company’s achievement of carbon footprint labeling is also an added advantage in competing within the current steel market.

The Carbon Footprint of Product refers to a label indicating the amount of greenhouse gas emissions generated throughout the product’s lifecycle—from raw material acquisition, production processes, transportation, usage, and disposal. The company aims to raise consumer awareness of its efforts to reduce greenhouse gas emissions and address global warming. By choosing products or services that are environmentally responsible, consumers contribute to greenhouse gas reduction. This also supports the shift towards a sustainable green industry in Thailand's construction and real estate sectors.

2) Pricing Strategy

Our pricing is fluctuated by demand and supply in the market, based on product quality, volume of demand, and cost of production, i.e., prices of raw materials, labor cost, exchange rates and cost of logistics. However, to maintain a competitive price range, the Company controls the cost of production, from procurement of raw materials, melting and casting process to optimize the cost. The Company has no policy to slump the price to take competition advantage over other operators. On the other hand, we concentrate on the product quality and good services to meet customers' demand.

At present, the Company has implemented the Systems Applications and Products or SAP program - the Enterprise Resource Planning or ERP, an ideal program for planning and managing all business segments to enhance rapid access to accurate and precise date.
The domestic sales is cash based or DL/C or trade credit with consideration on trading history, business operation and customers' financial status. The maximum credit terms is 60 days. However, at present, the Company has no policy to credit any customers in oversea markets. For oversea trading, the customer must issue a letter of credit at sight to the Company before delivery goods. When the steel price is fluctuated or the market demand dramatically increases, the Company will divert to cash trading by claiming payment in advance to generate operating funds for supplying raw materials.


3) Distribution Strategy and Places

Our marketing strategy contemplates with good extensive relationship with the customer as a priority in order to keep the existing customer base while enlarging to new customer bases to expand market share. The sales teams manage direct distribution to local customers and oversea customers.

Moreover, with the location in Kabinburi Industrial Estate, Prachinburi Province having comprehensive utilities and transportation systems, adjacent to sources of raw materials, enhances the convenience of product distribution by land and sea. Such advantages allow the Company to meet customers' need both local and oversea scale.

4) Sales Promotion

Recognizing that the product quality is a key toward success and trust and satisfaction of customers, the Company has established the strategy to manage relation with customers, to build trust by producing good quality products, offering product warranty, assuring fast delivery, having serviced mind, complying with the commitment made with customers, taking care and responsibility to customers with fairness, regularly visiting customers to receive their problems and requirements from different angles. The The Company has also established a strategy for sales promotion which includes varied trading conditions based on many factors, for instance, purchase order, payment term, payment history, risks of payment, the Company's cash liquidity.


5) Investment Strategy

The Company continues to seek for the business that sustains the Company Group as well as our stakeholders, both directly and indirectly. The primary stride is investing in alternative business to diverse risks from business, which is highly fluctuated to the business that yields with stability, to the investment extent and investment strategy. Another approach is to look for a business alliance that will drive and initiate the leaping growth to the Company Group while building trust among all stakeholders continually.


Company Strengths

  • The company has a maximum production capacity of 730,000 tons per year. This allows the company to expand production in line with the increasing demand for long steel products, as supported by government policies to promote investment. This will help reduce reliance on imports of long steel products and mitigate the impact on the country’s trade deficit.

  • The company has a business policy of not competing with customers. It focuses on producing long steel products for direct sale to customers, who will further process the products into long steel products through rolling. This has gained the company the trust and confidence of its customers, leading to continuous orders. The company can consistently meet customer demands and deliver products on time.

  • The company can produce a wide range of grades, cross-sectional sizes, and lengths to meet the diverse needs of various customer groups.

  • The company produces high-quality products by using modern machinery and efficient production processes.

  • The company is one of only two companies in Thailand that produce long steel products and is a member of the London Metal Exchange (LME), a global futures market. This means that the company's products meet globally recognized standards, increasing confidence in product quality and enhancing the company’s image. It also provides additional distribution channels for the company’s products in both domestic and international markets, allowing direct sales and/or sales through the LME system to international customers.

  • The company uses the SAP program, an Enterprise Resource Planning (ERP) system, which enables quick and accurate access to data and reports, facilitating efficient decision-making and management based on financial data.

  • The company’s factory is located in Prachinburi Province, equipped with comprehensive utilities and transportation systems, close to raw material sources, and convenient for distributing products both by land and sea.

  • The company’s factory is situated in the Kabinburi Industrial Zone, Prachinburi Province, which is a Zone 3 investment area promoted by the Board of Investment.

  • The company has invested in companies involved in renewable energy power plant projects. This is a low-risk business with high growth potential, especially as many countries around the world are increasingly prioritizing renewable energy sources.

Carbon Footprint Certification: In 2024, The company has received Carbon Footprint of Product (CFP) certifications for products RB6, RB8, and RB9. In 2025, The company has received Carbon Footprint of Product (CFP) certifications for products as follows:

  1. Deformed bar 8 mm (DB8)

  2. Deformed bar 10 mm (DB10)

  3. Deformed bar 12 mm (DB12)

  4. Steel billet 3SP (Billet 3SP)

  5. Steel billet SD40 (Billet SD40)

  6. Steel billet SR24 (Billet SR24)

as well as the Carbon Footprint of Circular Economy (CE-CEP) certification from the Greenhouse Gas Management Organization (GGMO). These certifications represent the total greenhouse gas emissions generated throughout the product life cycle, from raw material acquisition to production, transportation, use, and disposal. The company aims to raise consumer awareness about reducing greenhouse gas emissions and global warming, encouraging consumers to participate in reducing emissions by choosing environmentally conscious products and services. This also contributes to driving Thailand's construction and real estate industries toward sustainable green industry practices.


Characteristics of the target group

Previously, the Company has the policy that focuses on production and distribution to customers in Thailand as a primary base with the target to reduce the import of billet. Eventually, with recognized quality of products, the Company has expanded the sales oversea due to the growth of oversea customers. To cope with the highly fluctuated situation in steel market in 2019, the Company priorities price as a primary factor when presenting the sales. Our target customer is divided in 2 groups below.


a) Domestic customers

  1. Rolling mills that do not have own furnaces

This customer group purchases biller for production of the long steel products and distribution to wholesale-retail representative or construction contractors. In previous years, these rolling mills depended on imported billet from countries such as Russia, Ukraine, Federal Republic of Brazil, Japan, Republic of China (Taiwan) and Republic of Korea. Usually, the delivery is long and the cost is added up due to logistics fee. Therefore, this customer base is the main target group of the Company.

  1. Rolling mills with own furnaces and mills, but the production capacity in insufficient

This group of customers owns furnaces for billet and rolling mills. However, most of the furnace capacity is quite low and does not

  1. Domestic dealers

Domestic dealers are trading firms which make a purchase of various steel types for reselling to rolling mills and general customers to earn profit out of the differential rates between buying and reselling prices.


b) Oversea customers

Having a policy to expand customer base by exporting products to oversea market, in 2009 the Company decided to become a member of London Metal Exchange (LME) – the world class forwarded trading market, under the name CHOW KABINBURI. The aim is to enhance the distribution channels to a global scale and to demonstrate that our products is recognized as the product of the international standard. After joining as a LME member, the Company has not proceed the sales via the system yet due to the fact that the buying price in the system is relatively low comparing to normal market prices. On the other hand, our direct sales is made to oversea market such as ASEAN and the sales through dealers with the main target group such as ASEAN and dealers which make the resale of the Company’s products to operators abroad. Nonetheless, between 2013, 2014 and 2015, as the result of global economy recession, there was no income from sale to oversea customers which was not in line with the Company’s policy. Many countries stimulated export sector, especially China, causing difficulty for goods export while the selling price slumped, the Company eventually has diverted to domestic sales. Later in 2017, 2018 and 2019, the Company’s revenue from oversea customers reaches 100 percent without exporting thanks to the fact that, especially, ASIA, the steel in oversea market decreased as a result of the US-China trade war.

In 2020, steel situations in Thailand and abroad are significantly affected by the Covid-19 outbreak while other related industries are also affected. For instance, real estates and construction and steel demand in Thailand and abroad dropped, eventually. For the year 2021, the Company conducts business with prudence and closely monitors the situation. Revenue from domestic sales remains at 71% while revenue from export sector accounts 29%.

In 2021, the Company ceases the production process in order to implement development and improvement on the type of products and production process. More products types are added up to production line to meet variety needs of customers to enhance our competitiveness. Therefore, in 2021, the steel business does not generate significant revenue. In 2022, The Company ready to receive the production order in March 2022 to present.
Here is the table showing the distribution of product sales value for domestic and international customers from 2015 to 2025:

Customer Type

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

Domestic Customers

100%

100%

100%

75%

100%

71%

100%

73%

72%

100%

100%

Oversea Customers

-

-

-

25%

-

29%

-

27%

28%

-

-

Total

100%

100%

100%

100%

100%

100%

100%

100%

100%

100%

100%


Industry and Competition

Industry overview
- Steel Industry Structure

Steel industry is a fundamental factor in development of our country since it is a raw material used in many industrial production, for instance, construction, agriculture, automotive and electric appliance. Industry Steel industry structure is divided in 3 levels below:
1. Raw Steel Product

Iron Making is the process of smelting iron and casting into a bar called pig iron and sponge iron. It is the first step in iron industry which requires a very high investment and public utilities and infrastructure to facilitates the production process. In 2007, the Board of Investment Promotion approved TATA Steel (Thailand) Public Company Limited for the initial investment of iron making.

2. Semi-Finished Steel Production

The melting of primary iron product both solid, liquid and scraps, modifying properties and chemical composition and converting into steelmaking process. Three methods being highly used are Electric Arc FurnaCEPL: EAF, Electric Induction FurnaCEPL: EIF and Basic Oxygen FurnaCEPL: BOF. Then, the steel is cast into a different bar shape for various purpose of usage, for example:

  1. Small/long billet are used for the production of round bar, deformed bar and wire rod.

  2. Slab is used in production of steel plates such as hot-rolled steel plate, cold-rolled steel plate.

  3. Bloom and beam blanks are used in production of structural steel.

Iron industry in Thailand is considered a raw steel product production where the Company is one of the producers at this level. The Company uses the electrical arc furnace with the maximum length of steel bar 730,000 tons produced per year (maximum production capacity applied for permission in the Environmental Impact Assessment Report (EIA). Moreover, steel operators in some countries develop the production to finished level. For example, G Steel Public Company Limited and G J Steel Public Company Limited produce iron slap for making hot-rolled steel plate, TATA Steel (Thailand) Public Company Limited and Siam Steel Syndicate Public Company Limited produces billet for making of round bar.


Finished Steel Production

Finished Steel Production is the next step from raw steel product production, consisting of various procedures i.e., hot-rolling, cold-rolling, coating, steel pipe production, forging and the iron casting. The product from such a process will be used as a raw materials in other industrial production such as construction, agriculture, automotive, electric appliances, furniture, and packaging industry. The majority of iron industry operators in Thailand are finished steel product production. These products are classified in types as below:

a) Long products include round bar, wire rod, deformed bar. Mainly there are used in construction industry.

b) Flat products include hot rolled coil, cold rolled coil, coated sheet, hot rolled plate which will be used ad hoc in relevant industries such as construction, electric appliance, furniture and packages.

c) Shape steel products include wide-flange beam steel, I-shape beam, T-shape beam, channel steel, or C shape steel.

d) Cast steel product are the product of cast steel scraps forging into shapes for different usage, for instance, automotive components, machinery components, parts.

Global Steel Industry Overview

Global crude steel production in December 2025 reached 139.6 million tons, representing a 3.7% decline compared to the same period last year. By region, production contracted in Africa, Asia-Oceania, North America, and Russia & other CIS + Ukraine, with decreases of 0.3%, 6.3%, 0.4%, and 2.7%, respectively, compared to the same period last year. Production volumes were 1.9 million tons, 99.7 million tons, 9 million tons, and 6.9 million tons, respectively.

Conversely, production expanded in Europe (EU-27), other European countries, the Middle East, and South America, with growth of 3.9%, 13.8%, 13.9%, and 1.2%, respectively, compared to the same period last year, with production volumes of 9.9 million tons, 3.8 million tons, 5.3 million tons, and 3.2 million tons, respectively.

In December 2025, China, the world’s largest crude steel producer, produced 68.2 million tons, a 10.3% decline compared to the same period last year. India produced 14.8 million tons, growing 10.1% year-on-year. The United States became the world’s third-largest crude steel producer, surpassing Japan, with a production volume of 6.9 million tons, an increase of 3.6% compared to the same period last year.

(Source: Iron and Steel Institute of Thailand)

Thai Steel Industry Overview

In Q4 of the year 2025, Thailand’s total finished steel consumption reached 4.65 million tons, a 14.4% increase compared to the same period last year.

  • Long products consumption in Q4 2025 expanded 18.9% year-on-year to 1.97 million tons.

    • Bars & HR sections grew 30.1% to 1.33 million tons.

    • Wire rods reached 0.54 million tons, up 5.6%.

  • Flat products consumption in Q4 2025 grew 11.2% year-on-year to 2.68 million tons.

    • Hot-rolled (HR) sheets/coils increased 16.2% to 1.54 million tons.

    • Coated steel grew 3.6% to 1.07 million tons.

    • Cold-rolled (CR) sheets declined 5.1% to 0.65 million tons.

Finished steel production in Thailand in Q4 2025 totaled 2.14 million tons, up 29.2% year-on-year.

  • Long products production reached 1.39 million tons, up 32.2%,

    • Bars & HR sections increased 27.2% to 1.23 million tons.

    • Wire rod production rose 88% to 0.16 million tons.

(Source: Iron and Steel Institute of Thailand)

Growth Outlook for Thailand’s Steel Industry in 2026

Positive factors:

  • Thailand’s economy is projected to grow 1.6–2.0% in 2026, which is expected to stimulate the real estate construction sector. Consequently, demand for steel bars in Thailand is likely to recover and increase.

  • Consumers are increasingly aware of the importance of using high-quality, standard-compliant steel in construction projects. There is also growing attention to environmentally friendly production processes, which may create long-term value for producers and provide a safeguard against low-quality imported steel.

Negative factors:

  • Prices of steel bars in Thailand remain under pressure from low-cost imported steel, partly due to the European Union’s CBAM (Carbon Border Adjustment Mechanism), which may affect the growth of domestic steel producers and keep prices lower than expected.

  • Investment in environmentally friendly production processes and machinery is required to develop higher-value products, which may increase operational costs in the short term.

Industry & Competition (Overall)

Competition

In Thailand, billet manufacturing is divided in 2 groups which are the billet manufacturing for sales and billet manufacturing for internal processing. The manufacturer for sales is the direct competitor of the Company. However, the competition is considerably low since there are few billet manufacturers for sales, and the Company’s production capacity is the highest when comparing to the others. The billet manufacturing for internal processing is an indirect competitor, since their production is mainly for internal use within their own mills. For this reason, when the iron demand is increased, following the government’s policy to invest in mass transportation project, it will pose a positive impact to construction industry and real estate development. With the advantage of the Company’s high production capacity, the Company will be able to escalate the production capacity to accommodate such rising demand.

In addition, billet manufacturers have considerable bargaining power in the trading market due to the fact that billet is a unique product without any alternative option. Moreover, the government has not imposed any laws to govern the selling price, while the emerging manufacturers are very rare since the business requires huge investment.


Government measures related to the steel industry in Thailand.

Steel industry in Thailand is in industry to replace the import. Starting from the business developed to feed finished steel product in the country, which is the fundamental raw materials of various continuous industries. Being highly influences the national economic growth, the government hence recognizes the importance and imposes a measure related to iron industry in Thailand as follows:


ASEAN Free Trade Area or AFTA

The Association of Southeast Asian Nations (ASEAN) has the Common Effective Preferential Tariff Scheme (CEPT) as follows:

  • The original 6 member countries which are Negara Brunei Darussalam, Republic of Indonesia, Malaysia. The Republic of the Philippines, the Republic of Singapore and Thailand, reduced the import duty under CEPT tax list to 0% – 5% by 2003 and to 0% by 2010. -

  • The 4 new member countries: the Socialist Republic of Vietnam, the Lao People’s Democratic Republic, the Republic of the Union of Myanmar, and the Kingdom of Cambodia will reduce the import tax under CEPT to 0 - 5% by the Socialist Republic of Vietnam in 2006, the Lao People's Democratic Republic and the Republic of the Union of Myanmar in 2008, the Kingdom of Cambodia in 2010 and all member countries to 0% by 2015.


The goods listed under CEPT include iron and steel, which is within the production process that adequately converted for domestic scale. The custom tariff for billet, steel bar and deformed bar must reduce to 0% by 2010. At present, Thai custom tariff levied on ASEAN countries is between 2-5% depending on types and sizes of the products. For this reason, it is likely that the import rate of steel bar will drop in the future. Nonetheless, with a limitation on time and operating costs for importing steel bar, operators prefer steel bar manufactured in Thailand.


The policy that promote raw steel product, semi-finished steel product and finished steel product iron manufacturing

The Board of Investment (BOI) has announced the promotion approach on iron manufacturing business as to develop an iron industry that provide high-quality products, to enhance competitiveness to continuous industry and to drive Thailand to become the hub of iron manufacturing and exporting of the ASIAN. BOI has classified iron manufacturing businesses entitled for the investment promotion in Section 2: Mineral Mines, Ceramics and Basic Metal as follows:

Type:

Conditions and privileges:

Raw steel production and semi-finished steel production

- Raw Steel Production includes hot metals, sponge metal.

- Semi-Finished Steel Product includes slab, billet and bloom.

Condition

For raw steel production, including the semi-finished steel production carried on from the raw steel production under the same project, the debt-to-registered capital ratio must not exceed 2:1.

Rights and Benefits

  1. The raw steel production, including the semi-finished steel production carried on from the raw steel production under the same project, shall have the rights and benefits as follows:

1.1 Rights and benefits according to the business nature which must be important and beneficial to the nation under special circumstances as below.

  • Exemption of import duties on machinery regardless of the location;

  • 8-year corporate income tax exemption regardless of location;

  • No determination on corporate income tax exemption;

  • ther rights and benefits shall be according to the criteria set forth for each location;

1.2 If the manufacturing facilities is located in the Investment Promotion Zone (Zone 3), the company shall receive the right and benefit granted under Section 35 (1), 35 (2) and 35 (3) which are:

  • Five-year corporate income tax exemption, accounting for 50% of investment, from the expiration as per Section 31, paragraph one or from the date receiving income from promoted business, in case the promoted entity does not receive corporate income tax exemption.

  • Double deduction for transportation, electricity and water costs, which are considered as expenses in the promoted business for benefit in calculating corporate income tax under conditions, procedures and duration as specified by the Board.

  • Deduction to the net profit of 25 per cent from the investment in installation or construction of the facilities of the promoted business under the criteria determined by the Board. The promoted person can select to deduct the net profit from one or more years within 10 years from the date receiving income from such investment, in addition to the normal depreciation cost.

    1. Semi-Finished Steel Production shall receive the rights and benefits under criteria and notification of the Board of Investment No. 1/2543 dated 1 August 2000.

Finish Steel Production

  • Long steel products are structural steel, steel round bar, wire rod, steel wire.

  • Slab products include hot-rolled or cold-rolled stainless steel plate, thick plate, hot-rolled or cold rolled steel plate, coated steel plate.

Rights and Benefits

Receive the rights and benefits under criteria and notification of the Board of Investment No. 1/2543 dated 1 August 2000.


Thailand Industrial Standard (TIS.)

The Thai Industrial Standards Institute (TISI.) is an organization that determines national standards which are consistent with international guidelines in order to meet the needs of government, business, society and to promote competitiveness. TISI. does not regulate that the semi-finished steel production must be under the Thailand Industrial Standard (TIS.). However, according to the Royal Decree, the finish steel product must meet the required standard.

At present, the Royal Decree states that the finished steel products must meet the TIS. standard. There are total 19 types of steel consisting of 17 types are civil and construction material section, and 2 types of mechanical engineering and vehicles, as follows:

TIS. no.

Description

Effective date

Civil and Construction Materials

1 TIS. 20-2543

Reinforced round bar: steel bar

8 Oct 2004

2 TIS. 24-2548

Reinforced round bar: deformed bar

21 May 2006

3 TIS. 95-2540

Steel wire for pre-stressed concrete

30 Mar 2003

4 TIS. 348-2540

Low-carbon wire rod

6 Dec 1998

5 TIS. 420-2540

Stranded steel wire for pre-stressed concrete

30 Mar 2003

6 TIS. 528-2548

Hot rolled carbon steel slap for general work and forming

14 Apr 2008

7 TIS. 1227-2539

Hot rolled structural steel

10 May 1998

8 TIS. 1228-2549

Cold rolled structural steel

14 Apr 2008

9 TIS. 1390-2539

Hot rolled steel sheet pile

21 Aug 1998

10 TIS. 1479-2541

Hot rolled carbon steel, coil, slab, plate and sheet for general structural work

25 Aug 2001

11 TIS. 1499-2541

Hot rolled carbon steel, coil, slab, thick, and thin sheet for welded and assembly structure

25 Aug 2001

12 TIS. 1501-2552

Hot rolled carbon steel slap for machinery structure

11 Apr 2011

13 TIS. 1735-2542

Hot rolled carbon steel, rolled and striped sheet for piping work

25 Aug 2001

14 TIS. 1999-2543

Hot rolled steel, coil, strip sheet, plate and sheet for automotive structure

5 Sep 2002

15 TIS. 2011-2543

Hot rolled steel, coil, strip sheet, plate and sheet which is resistant to atmosphere corrosion

5 Sep 2002

16 TIS. 2012-2543

Cold rolled carbon steel, coil, slab, thick, and thin sheet for general and forming work

13 May 2002

17 TIS. 2060-2543

Hot rolled carbon steel, coil, slab, plate and sheet for cylinders

14 Oct 2002

Mechanical and Vehicle Engineering

  1. TIS. 1884-2542

Hot rolled high strength steel, coil, strip, plate and sheet with improved formability for automobile structural uses

4 Nov 2001

  1. TIS. 2140-2546

Cold rolled steel, coil, strip and sheet for automobiles uses

10 Jan 2005

Source: Thai Industrial Standards Institute

Finish Steel Products, which manufactures products under the Thai Industrial Standards (TIS), as specified by the Thai Industrial Standards Institute (TISI) under the Ministry of Industry. Therefore, the brand of Round Bar and Deformed Products marked “CSI” on the surface.

In 2024, The Company executed a partial business transfer relating to the production and distribution of steel products (the “Partial Business Transfer”) to its subsidiary, Chow Steel Manufacturing Co., Ltd. (“CSM”), in which the Company holds 100% equity interest. The Partial Business Transfer required the Company to transfer of all relevant operating licenses to CSM as well as the transfer of fixed assets, trademarks, and the benefits under the investment promotion certificate, etc.

In Q3/2025, the Company received a notification from the Department of Industrial Works (“DIW”) confirming that the transfer of the factory operating certificate in the industrial estate area under Section 30 of the Factory Act B.E. 2535 (Form Kor.2), which the Company have been approved in December 2024, is in compliance with the applicable rules and procedures. Subsequently, in September 2025, the Thai Industrial Standards Institute (“TISI”) issued a letter granting CSM permission to receive the transfer of the industrial product manufacturing license and to emboss the abbreviation “CSI” on the products in lieu of the full name for the display of the industrial standard mark. In addition, the Company received a letter confirming that samples of products manufactured by the Group after the machinery and production process improvements complied with the applicable standards. Therefore, In 2025, the Company successfully completed all required license transfers and obtained approval to resume product manufacturing.

Procurement of Products & Services

Reporting Mode

3117

Procurement (Overall)

Procurement of raw materials and products

Under OEM contract started in 2019, the contractor will provide the Company with all materials necessary for the production. The main composition is scrap and chemicals such as Ferro-Silicon and Ferro-Manganesse, which will be used in the preparation of hot metal and improvement of hot metal quality respectively, as follows:


a) Scrap

Scrap is the main element used in billet production, which includes heavy metal scrap (HMS), Spot 100 metal, return scrap from production process, such as the non-good (NG) and scales including other metal scraps. These pieces will be melted in the electric furnace.
For taking scraps into the Company’s facilities, the trucks will drive on the scale at the front gate before delivering at the scrap yard and then drive on the scale again when leaving the facilities in order to calculate the difference in weight to identify the scrap weight. In billet production, the scrap will be weighted before moving to the front of furnace site. Then the magnetic crane will suck the scrap to the trolley, which will slide and transfer to the furnace. The scrap used in this production is not weighted due to the limitations of the Company’s production process. The Company calculates formula using Standard Cost method to reflect the estimation, quantity and value of scrap used in the production process. The Company considers and review and improves the calculation formula to identity quantity of scrap used regularly. Any variance is recorded to the accounting system to reflect the correct cost of sales of each accounting period by comparing weight of the ready-made product scaled before delivery to the customer and the customer’s weighting note before accepting the Company’s delivery. Furthermore, the Company hires independent specialist to assess remaining scrap in each accounting year. In the event the independent specialist’s assessment differs from the accounting system significantly (over 10%), the Company adjusts cost of sales and remaining quantity.


b) Other raw materials

The chemical element or compound used for improving hot metal quality helps in decontaminating the hot metals and speeding up melting process. Mainly, the Company purchase these chemicals from the dealers importing from abroad since the price is cheaper than local market. The chemicals are from 3 types:

  • Silicon Manganese: It is a substance used to increase the content of silicon and manganese and reduces the amount of oxygen in the hot metal.

  • Ferro manganese: It is a substance used to increase manganese content, reduce the amount of oxygen in the hot metal, which will separate into slag and it can be recycled in the iron melting process.

  • Ferrosilicon : It is a substance used to increase silicon content, to separate oxygen from hot metal and reduce sulphur and phosphate content in hot metal, which will be extracted as a slag floating up on the hot metal surface.

Moreover, other raw materials such as silicon sand and boric acid are used together to crystalise around the furnace in order to extend lifetime of the furnace. In addition, the heat resistant cloth will insulate copper coil around the furnace from the heat.

In addition to the major raw materials mentioned above, there are energy and fuel necessary for the production process as follows:

1) Electricity

The Company's facilities receive electricity from Kabinburi Provincial Electricity Authority. There are 2 substations located adjacent to the production facilities Phase 1 and production facilities phase 2. The said substation transmits the power via 115 kV from Kabinburi PEA. Inside the substation is the 30/40MVA and 80/100MVA transformers. The Company owns 2 diesel generators with 500KVA/hour and 1,000KVA/hour capacity for emergency.
2) Diesel

Diesel oil is used as fuel in the production process, for instance, warming up the tanks for hot metals, warming up the hot metal cubicles at the continuous casting machine and backup power generator. It is also used in logistics, for instance, transporting vehicles used within the projects such as forklifts, backhoe, trucks and loaders. The diesel oil is stored at the 20 m3 tank. The Company builds the bund wall around the diesel storage yard and installs the grease trap to prevent against oil leakage and contamination to the soil.

3) Liquidfied pretoluem gas (LPG)

LPG is used as a fuel composition in cutting billet at the facilities. The LPG storage is in the 48 kg cylinders, placed at the warehouse.

4) Liquid Oxygen

The liquefied oxygen is used as a component together with liquefied petroleum gas for cutting billet and cleaning furnace. The truck loading liquefied oxygen will deliver at the facilities and transmit to cylinders for use at the production building.

5) Argon gases

Argon gas with a purity of 99.99% is used for testing the quality of hot metals, to identify the chemical composition. Then the additive is added to hot metals to extract contaminants and convert into slag, improving cleanliness of the hot metal. After that, is sampling of the hot metal for another chemical composition testing. Then the hot metal will be melted until the chemical composition will meet specifications. The argon gas delivered from the truck is transmitted to the cylinders for storage.

The Company has sufficient storage space for maximum production capacity. The storage consists of Indoor Scrap Yard located within Production Building Phase 1 and Production Building Phase 2 having a total area of 9,936 square meters, accommodating approximately 24,840 tons of scraps, Outdoor Scrap Yard, having an area of 25,000 square meters with storage capacity for approximately 62,500 tons of scrap. The finished billet is stored in the logistics area within the Production Building Phase 1 and Production Building Phase 2, having a total area of 3,760 square meters for approximately 60,230 tons. The Logistic Area can accommodate the deliver from lorries adequately.


Production process

Billet production process

Since the Company's manufacturing facilities is located in Kabinburi Industrial Zone (KIZ), No. 518/1 and 518/3, Village No. 9, Nong Kee sub-district, Kabinburi district, Prachinburi Province which is the area in Zone 3, the Company has received the investment privilege from the Board of Investment (for more details, please see Part 2., Article 3.7 privileges granted to the Company). Our manufacturing facilities consist of 2 phases of melting and casting mill for billet. The mill locates in the same area on total 70 rai, having maximum production capacity of 730,000 tons per year according to the Environmental Impact Assessment Report (EIA). Further details are as follows:

Factory

Starts Commercial Operation

Production Capacity

  1. Billet Production Factory Phase 1

starts commercial operation

in December 2005

maximum production capacity

250,000 tons per year.

  1. Billet Production Factory Phase 2

starts commercial operation

in July 2008

maximum production capacity

480,000 tons per year.

Our production factory can be operated 24 hours daily. However, with electric induction technology which uses electricity converted into thermal energy, the cost of electricity of vital cost of the Company. Recognizing such fact, to confirm the management and cost optimization with the electricity rate, the Company has a policy to produce steel products during the off-peak period - 1 shift during weekdays (from 22.00 hours - 9.00 hours and 2 shifts (24 hours) during holidays and public holidays. The production during such off-peak allows the Company to manufacture goods with maximum capacity totaling 450,000 tons, where in Factory Phase 1 at 150,000 tons, Factory Phase 2 at 300,000 tons. Our Factory Phase 1 and 2 consist of 4 sets and 5 sets of furnaces (Factory Phase 2 start using the 5-set from September 2011) respectively. Each set consists of 2 circles. The alternative use of each set enables the easy maintenance, without ceasing operation for annual maintenance or major overhaul.


With the production process that involves manufacturing technology from abroad and is internationally recognized, the CHOW's products are of high quality and meet the standard as customers expect. Our billet production process consists of 3 major procedures: from scrap preparation, scrap melting with electric induction furnace and adjustment of composition to meet required specifications, and casting hot metal into the billet.


Raw material preparation

The main raw material for billet production process is scrap. The Company stores scrap in production facilities with strong structure and well sealed cover, convenient and fast for application, minimizing time and expenses of transporting scraps. Moreover, there is a Scrap Yard allocated as an alternative storage place for extra scrap, located out of the production facilities within total area 25,000 square meters, capable of 62,500 tons of scrap. To prepare raw materials, the Company will use 10-ton magnetic crane suck the scrap of good quality and size placed in the production facilities to the furnace until the hot metal will reach the assigned level. In case the scrap quantity in the production facilities is insufficient or the size or quality does not meet the specifications, the Company will transport more scrap from the Scrap Yard to add up to the furnace.


Scrap melting and formulation

There are 4 sets or 8 furnaces and 5 sets or 10 furnaces of electric induction furnace (EIF) in Factory Phase 1 and Phase 2 (start operating 5 sets or 10 furnaces since September 2011) respectively. Daily, the Company will operate only 4 furnaces and 5 furnaces per for Factory Phase 1 and Phase 2 respectively, alternatively for maintenance purpose, to extend the lifetime of the furnace and to reserve as a backup in case of defect or damage. Normally, the melting process takes approximately 90 minutes per furnace, basing on transforming electricity into thermal power. In other world, the method is releasing electricity current through copper coil to convert magnetic field inside the metal into thermal power that melts the scrap at 1,650 – 1,700 Celsius. During the melting process, magnetic crane will gradually suck the scrap into a furnace. In the meantime, the hot metal sample will be collected to identify chemical composition such as carbon, silicon, phosphorus, sulphur and manganese etc. using spectrometer to ensure the chemical composition of hot metal will me required quality and specifications.
When the hot metal boils and has a reaction, the additive such as ferrosilicon, ferromanganese, will be added to extract carbon, hydrogen, nitrogen, phosphorus, sulphur and other contaminant into slag, purifying hot metal. Then sample the hot metal to test chemical composition to ensure the hot metal composition will meet the required standard and quality. After that, the slag will be removed from the furnace and the purified hot metal after chemical adjustment will be poured into the ladle.


Billet casting

Billet casting process takes approximately 30 minutes, starting from lifting the hot metal tank with a crane to continuous casting machine (CCM), and pour the hot metal to tundish where the hot metal temperature will be maintained between 1,540 - 1,560 Celcuis and must be cast into the billet continuously in the mould with coolant inside. The cast billet will be cooled down by water spraying on all 4 sides to reduce temperature of the billet surface. The billet will be pressed with a dummy bar, then passing to an automatic cutting machine which has only in the Factory Phase 2. For Factory Phase 1, the cutting is with gas to get the billet length as required. The billet section will be randomly tested to check physical quality. Then the billet is transferred to cooling bed to let it harden.


Billet quality control

The Company's quality control of billet is divided into 2 major processes as follows:

a) Chemical Properties Check and Test:

The Company checks product quality by running a test to identity chemical composition, dividing in 2 steps:

  1. Chemical test includes silicon sand, boric acid, sodium silicate, ferrosilicon, ferromanganese and silicon-manganese. Only raw materials with required properties and quality will be selected.

  2. Hot metal testing during the melting process is a chemical checking to adjust the specifications and quality of hot metal by using a spectrometer. The hot metal will be checked twice: first is when the hot metal volume is half of the furnace, and second is when the hot metal volume reaches the determined level in the furnace.


b) Physical Properties Check

the physical checks consist of 3 steps:

  1. 1. Checking raw materials prepared which are scrap, fire resistant equipment and consumables, such as heat resistant cloth. Only raw material with require specification and quality will be selected.

  2. Checking billet during the production process by cutting edge of the billet with section machine.

  3. Checking finished billet by measuring size, weighting and checking crack, including external surface with the experienced and skilled technician. The Company will issue the certification for the billet with required chemical and physical properties for customers as to warranty the standardized product.


Water used in the production process.

In billet production process, the water will be used in 2 major systems which are Indirect Cooling Water and Direct Cooling Water as follows:

a) Indirect Cooling Water

The Indirect Cooling Water include a Cooling system for heat transferring and keeping the temperature of equipment not too high to cause danger to the production process. This coolant is for ventilating heat in electrical appliances such as power control panel of the furnace, air compressor, air conditioning cooling, EIE Cooling and Mold CCM Cooling. After passing these procedures, the coolant is stored at the Indirect Hot Well with the capacity around 1,123 m3 and 2,240 m3 for Factory Phase 1 and 2, respectively. Then the coolant will be pumped to the Cooling Tower while partial of the heat is transferred to the air, reducing water temperature. After the Cooling Tower, the coolant is stored in the Indirect Cooling Water for circulating to coolant process.
b) Direct Cooling Water

This water is sprayed on the billet through the Continuous Casting Machin to reduce temperature of the billet to normal temperature. The water which has been used for coolant will contain scales which will settle during the slow flow back to the Direct Cooling Well having the capacity around 875 m3 and 960 m3 for Factory Phase 1 and 2 respectively. After that the water will be pumped to the Cooling Tower to reduce temperature and stored in the Direct Cooling Well for circulating for use in another round. The settled scale will be used as a raw material in the new melting process.


Bag Filter System

The Company's furnace is an electric induction furnace, therefore, the air pollution generated is lower than other types of furnaces. The pollutants is dust, which consists of fume, iron oxide and other metals contaminated in the scrap and carbonmonoxide, which is a result of incomplete combustion of the organic substance contaminated with the scrap. The Company has installed 6 bag filters where 4 are at the Factory Phase 2 and 5 are at Factory Phase 2 (the 5th filter is used from September 2011 onwards) with the vacuum power 1,350 m3 per minute. the filter operates by vacuuming the air with dust from the furnace, through cooler tube to reduce temperature, then to the bag filter where the dust will be separated before releasing pure air to the atmosphere. Such progress will minimize the impact from dust generated during the metal melting process and prevent the potential environmental impact that may occur to the nearby communities.


Maintenance System

The Maintenance Department will plan the maintenance system for machinery and equipment used in the production for melting mill including assembly machine in other production such as heavy equipment, air compressor including the Preventive Maintenance and Corrective Action to ensure that the machine and equipment will function normally, to prevent against an unexpected production process. The Maintenance Department also hire external specialists for checking and testing systems and machinery within the time frame as stipulated by law. The machinery maintenance record will be kept with regular review and determination on the maintenance schedule every year.


Renewable Energy Business

The production and sale of electricity from solar energy is a core business of the group, as it generates a stable and predictable cash flow throughout the life of the power plant projects. The group has a policy of investing in and developing solar power plant projects both domestically and internationally. Currently, the group’s investments in solar power plant projects are in Japan, Thailand, and Australia.


Core Business

1.Production and sale of electricity from solar energy

2.Consulting services and related services for solar power plants

3.Sale of materials and equipment for the construction of solar power plants

4.Strategic Solar Power Plant Development and Sales Business


Joint Investment in Solar Power Projects in Thailand

In 2023, the group jointly invested with BlackRock, the world’s number one investment fund, to provide consulting and installation services for solar power plant projects in Thailand. The group holds a 49% stake in the solar power plant business in Thailand, under the registered capital. This joint venture with BlackRock not only enhances the group’s opportunities to expand its solar rooftop business in Thailand and internationally but also provides greater operational flexibility in terms of capital, access to new, low-cost financing sources, and a positive corporate image that is more recognized internationally. This venture lays a solid foundation for the group’s renewable energy business.


Climate Change Management

The group is committed to conducting business with responsibility toward the environment, society, and corporate governance. The goal is to transition to a low-carbon organization and reduce greenhouse gas emissions in line with established targets. The group is focused on developing solar cell projects for partners across the country, ensuring the optimal use of electricity generated from solar energy in line with each company’s specific needs.


Additionally, the group has implemented an Environmental and Social Management System (ESMS) in accordance with the standards set by the World Bank through the International Finance Corporation (IFC), under the supervision of the World Bank Group. This system covers business practices related to the environment, society, and operational safety. The group has also received the ISO 14001 certification for its environmental management system in 2024.


Group's Power Plant Projects by Type

1. Ground-Mounted Solar Power Plants in Japan

The group has 9 solar power plant projects in Japan with a total installed capacity of 62 MW. All the electricity generated from these projects is sold to private power companies in Japan under Non-Firm Power Purchase Agreements at a rate of 32-40 yen per kilowatt-hour (approximately 10-13 THB per kilowatt-hour) over the 20-year contract period.

The group began investing in solar power plants in Japan in 2014, recognizing the opportunity to earn a good return from the high feed-in tariff for electricity generation, as well as low borrowing costs and longer loan periods compared to projects in Thailand. The company conducted a thorough study of the economic conditions, industry regulations, and laws related to solar power plant investments in Japan. This allowed the group to gain a clear understanding of the business, investment structure, and project design. The group has since invested by acquiring operating licenses and other key licenses, allowing the development of the projects to commercial electricity generation.

In 2020, the company’s board of directors approved the sale of certain assets, including 4 subsidiaries in Japan, which owned 4 solar power plant projects, and 2 subsidiaries that owned 5 solar power plant projects. This was in line with the group’s strategy for subsidiary business operations. In 2022, the subsidiary transferred shares and ownership rights in the solar power plants, including land titles, to the buyers, except for the Saito project (2.2 MW) located in Saito, Miyagi Prefecture, Japan, which is currently in negotiations with a new buyer.


2. Solar Rooftop Projects and Solar Farm in Thailand

The group has 965 solar rooftop contracts in Thailand, with a total installed capacity of 6.62 MW. Each contract has an installed capacity ranging from 3-10 kW. The electricity produced is sold to the Provincial Electricity Authority (PEA) and the Metropolitan Electricity Authority (MEA) under Non-Firm Power Purchase Agreements at a fixed rate of 6.85 THB per kilowatt-hour for the entire 25-year contract period, starting from the date of commercial operation. The solar rooftop projects in Thailand are investments made through Shining Sky Holdings Co., Ltd. (“SSH”), a joint venture in which the Company holds an indirect 51.00% ownership. Subsequently, in 2021, the rights to these projects were transferred to another subsidiary, Thai Solar Rooftop CP Co., Ltd., which now operates the projects.

In 2020, the Group established Chow & Haco Solar Co., Ltd., a joint venture with Haco Electric (Thailand) Co., Ltd., to engage in the business of producing and selling solar power as well as providing construction services for renewable energy projects in Thailand. The Group also announced the establishment of Chow & CKE Renewable Co., Ltd., a joint venture between the Group and Charoen Krung Engineering Co., Ltd., to operate in the business of solar power generation systems and other renewable energy projects.

Currently, the Group has operational power plant projects with commercial operation dates (COD) under PPA agreements, both in Thailand and Japan, totaling 105 megawatts.

Raw Material Acquisition (Overall)

The details are provided in section 1.2.2.3 Procurement of Products and Services.

Production Policy (Overall)

The company has a policy to produce long steel bars by setting the chemical composition to align with the chemical composition of round bars according to Thai Industrial Standards (TIS) 20-2543 and deformed bars according to TIS 24-2548. This policy aims to help steel producers create products that meet the required chemical specifications, even though the Thai Industrial Standards Institute (TISI) has not set standards for long steel bars. Additionally, the company is registered under the name CHOW KABINBURI with the London Metal Exchange, a global futures trading market. This registration demonstrates that the company’s products have been recognized for quality standards at an international level, allowing the company to use this as a channel to sell its products in international markets and promoting broader acceptance of its products.


However, under the OEM (the tall manufacturing service agreement) that commenced in 2019, the company receives all production-related raw materials from the contracting party. The key raw materials used in the manufacturing process include scrap metal and chemicals such as Ferro-Silicon and Ferro-Manganese.


In 2024, the company received certifications for three products: RB6, RB8, and RB9. These certifications enhance the value of the products, the organization, and its stakeholders, along with addressing the changing consumer focus on environmental concerns when making purchasing decisions. The company’s carbon footprint label certification is also a competitive advantage in the steel market. The Carbon Footprint of Product label represents the greenhouse gas emissions produced throughout the product’s life cycle, from raw material sourcing, manufacturing, transportation, use, and disposal.


The company expects consumers to recognize its commitment to reducing greenhouse gas emissions and addressing global warming. This awareness aims to encourage consumer participation in reducing greenhouse gas emissions by choosing products or services that prioritize the environment. Additionally, it contributes to driving Thailand’s construction and real estate industries toward a sustainable green industry.

The Group has begun to apply the concept of sustainable corporate development: ESG to its management practices, integrating environmental, social, and governance responsibilities into all processes in a transparent and auditable manner. The company believes that developing the organization under the ESG framework will enable the group to grow and coexist with society sustainably, rather than simply conducting business to generate returns for stakeholders. Implementing ESG into the organization's development takes time, cost, and a sense of responsibility among all employees. The company is committed to achieving its goals and has established an ESG working group to oversee its implementation in each business segment.

Distributors (Overall)

Under the toll manufacturing service agreement (OEM) that began in 2019, the company will receive the necessary raw materials for production from the contractor. The key raw materials used in the production process include scrap metal and chemicals such as Ferro-Silicon and Ferro-Manganese.

Number of Raw-Material Distributors (Overall)

2

Production Capacity (Overall)

ItemUnitUsedCapacity
Billet Melting and Casting Mill 1+2Ton20730,000

Domestic/Overseas Purchase Proportion (Overall)

Raw MaterialSource CountryValue
Scrap and chemicalsThailand218,899,805.5

Projects Under Construction

Has Projects Under Construction (Y/N)

No

Debentures & Bills of Exchange

Has Debentures (Y/N)

No

Convertible Securities

Has Convertible Securities (Y/N)

No

Contents